I-IPE Steel Beam EN Standard Hot Rolled Structural I Beam

I-IPE Steel Beam EN Standard Hot Rolled Structural I Beam Umfanekiso obonisiweyo
  • I-IPE Steel Beam EN Standard Hot Rolled Structural I Beam
  • I-IPE Steel Beam EN Standard Hot Rolled Structural I Beam
  • I-IPE Steel Beam EN Standard Hot Rolled Structural I Beam
  • I-IPE Steel Beam EN Standard Hot Rolled Structural I Beam

Inkcazo emfutshane:

I-IPE Steel Beam yi-EN hot rolled structural I section beam esetyenziswa kakhulu kulwakhiwo, kwizakhiwo zoshishino, kwizakhiwo zentsimbi, nakwiiprojekthi zobunjineli.

Yenziwe ngentsimbi enamandla aphezulu, inika amandla amahle okuthwala umthwalo, ukuchaneka kobukhulu, kunye nokuveliswa okulula.

Ifumaneka ngobukhulu, ubude, kunye nonyango lomphezulu olulungiselelwe wena ukuze kuhlangatyezwane neemfuno zokwakha zehlabathi.


  • Indawo Yokuqala::iTshayina
  • Igama lebrand::Yasebukhosini
  • Ubukhulu:I-IPE/IPN 80-600
  • Ubude:Isitokhwe se-6 m kunye ne-12 m, Ubude obulungiselelwe wena
  • Ixesha lokuzisa:Iintsuku zokusebenza ezili-10-25
  • Ixesha lokuhlawula:T/T
  • Isiqinisekiso soMgangatho:I-SGS/BV/ISO 9001
    • Thumela i-imeyile kuthi I-WhatsApp

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Intshayelelo yeMveliso

    Umgangatho EN Igama lebrand Yasebukhosini
    Ibanga S235JR,S275JR,S355JR Isicelo Ukwakhiwa kweZakhiwo
    Ukunyamezelana ±1% Imilo Uhlobo lwe-I
    Inkonzo Yokucubungula Ukusika, Ukudibanisa, Ukubetha, Ukugoba, Ukuwelda Ubuchule I-Hot Rolled
    Ixesha lokuzisa Iintsuku ezi-7 ukuya kwezi-15 Izinto eziphathekayo S235JR/S355JR
    I-alloy okanye Hayi I-non-Alloy Umphezulu Umphezulu ogqunyiweyo
    Uku-invoyisi Ngobunzima Bokwenyani I-MOQ Iitoni ezingama-20
    Indawo yemvelaphi eTianjin, eTshayina IXESHA LOKUHLAWULA TT

     

    Jonga isitokhwe samva nje kunye nexabiso

    Ukwakhiwa kweeKhemikhali kunye neePropati zoMatshini

    Ibanga Ulwakhiwo lweeKhemikhali (Ubuninzi %) Amandla okuKhula (i-MPa) Amandla okuThamba (MPa) Ukwandiswa (%) Uvavanyo lweMpembelelo
    S235JR C ≤ 0.17, Si ≤ 0.35, Mn ≤ 1.40, P ≤ 0.035, S ≤ 0.035 ≥ 235 MPa 360–510 MPa ≥ 26% 27J kwi +20°C
    S275JR C ≤ 0.20, Si ≤ 0.35, Mn ≤ 1.50, P ≤ 0.035, S ≤ 0.035 ≥ 275 MPa 410–560 MPa ≥ 23% 27J kwi +20°C
    S355JR C ≤ 0.24, Si ≤ 0.55, Mn ≤ 1.60, P ≤ 0.035, S ≤ 0.035 ≥ 355 MPa 470–630 MPa ≥ 22% 27J kwi +20°C

    Ubungakanani be-IPE/IPN

    Ubukhulu be-IPE
    Ubukhulu be-IPN
    Ubukhulu be-IPE
    Into Ubunzima (kg/m2) Ubunzulu (mm) Ububanzi (mm) Ubukhulu bewebhu (mm) Ubukhulu beFlange (mm)
    I-IPE 80 6 80 46 3.8 5.2
    I-IPE 100 8.1 100 55 4.1 5.7
    I-IPE 120 10.4 120 64 4.4 6.3
    I-IPE 140 12.9 140 73 4.7 6.9
    I-IPE 160 15.8 160 82 5 7.4
    I-IPE 180 18.8 180 91 5.3 8
    I-IPE 200 22.4 200 100 5.6 8.5
    I-IPE 220 26.2 220 110 5.9 9.2
    I-IPE 240 30.7 240 120 6.2 9.8
    I-IPE 270 36.1 270 135 6.6 10.2
    I-IPE 300 42.2 300 150 7.1 10.7
    I-IPE 330 49.1 330 160 7.5 11.5
    I-IPE 360 57.1 360 170 8 12.7
    I-IPE 400 66.3 400 180 8.6 13.6
    I-IPE 450 79.1 450 190 9.4 14.6
    I-IPE 500 90.7 500 200 10.2 16
    I-IPE 550 106 550 210 11.2 17.2
    I-IPE 600 124.4 600 220 12 19

     

    Ubukhulu be-IPN
    Into Ubunzima (kg/m2) Ubunzulu (mm) Ububanzi (mm) Ubukhulu bewebhu (mm) Ubukhulu beFlange (mm)
    I-IPN 80 5.9 80 42 3.9 5.9
    I-IPN 100 8.3 100 50 4.5 6.8
    I-IPN 120 11.1 120 58 5.1 7.7
    I-IPN 140 14.3 140 66 5.7 8.6
    I-IPN 160 17.9 160 74 6.3 9.5
    I-IPN 180 21.9 180 82 6.9 10.4
    I-IPN 200 26.2 200 90 7.5 11.3
    I-IPN 220 31.1 220 98 8.1 12.2
    I-IPN 240 36.2 240 106 8.7 13.1
    I-IPN 260 41.9 260 113 9.4 14.1
    I-IPN280 47.9 280 119 10.1 15.2
    I-IPN 300 54.2 300 125 10.8 16.2
    I-IPN320 61 320 131 11.5 17.3
    I-IPN 340 68 340 137 12.2 18.3
    I-IPN 360 76.1 360 143 13 19.5

     

    Ukulungele ukufumana ubungakanani obungakumbi?

    Khuphela itshathi epheleleyo yobukhulu be-I Beam!

    COFA APHA

    Umphezulu wokugqiba

    Umfanekiso_4
    i beam111
    222

    I-Hot Rolled Black: Imeko eqhelekileyo

    Ukucoca nge-hot-dip: ≥85μm (ihambelana ne-ASTM A123), uvavanyo lokutshiza ityuwa ≥500h

    Ukwaleka: Ipeyinti yolwelo yatshizwa ngokulinganayo phezu komphezulu wentsimbi kusetyenziswa umpu wokutshiza osebenzisa umoya.

    Umxholo Owenzelwe Wena

    Udidi Iinketho Inkcazo I-MOQ Ixesha lokukhokhela Uhlolo
    Ubukhulu H, B, tₙ, t_f, L Ubungakanani obuqhelekileyo okanye obuqhelekileyo iitoni ezingama-20 Iintsuku ezisi-7–15 Ubukhulu, ukunyamezelana kobude
    Umphezulu Umnyama, ukuqhumisa, ioyile, ipeyinti/i-epoxy, i-galvanizing Ukukhusela ukugqwala iitoni ezingama-20 Iintsuku ezili-10–20 Imeko yomphezulu, ubukhulu bengubo
    Ukucutshungulwa Ukubhola, ukusika, ukuhombisa, ukuwelda, ukwenziwa kwangaphambili Ukwenziwa ngokwemizobo nganye iitoni ezingama-20 Iintsuku ezili-15–30 Ukujonga ukuzoba kunye nokuwelda
    Ukumakisha kunye nokupakisha Ukumakisha ngokwezifiso, ukubopha, ukhuseleko lokuphela, ukungangeni manzi Ilungele ukuthumela ngaphandle iitoni ezingama-20 Iintsuku ezi-3–7 Ukuthembeka nokumakisha ukupakisha

    Inkqubo yeMveliso

    1. Ukulungiswa kwezinto eziluhlaza

    Iibhilethi zentsimbi ezikumgangatho ophezulu zikhethwa ngokweI-EN 10025imigangatho. Ukwakheka kweekhemikhali kunye neempawu zezinto ezisetyenzisiweyo ziyahlolwa ukuqinisekisa umgangatho ozinzileyo ngaphambi kokuba kuvele imveliso.

    2. Ukufudumeza nokuqengqeleka

    Iibhilethi zentsimbi ziyafudunyezwa kubushushu obuphezulu kwaye zidlula kwiirolling mills ukuze zenze umgangathoIprofayili yecandelo le-IPE Ienobukhulu obuchanekileyo kunye nolwakhiwo olufanayo.

    3. Ukulungisa nokusika

    Emva kokuqengqeleka okushushu,Imiqadi yentsimbi ye-IPEzilungisiwe kwaye zinqunyulwe zibe bubude obuqhelekileyo okanye obulungiselelwe wena ngokweemfuno zabathengi.

    4. Unyango Lomphezulu

    Imisebe ye-IPE ingacutshungulwa ngokudutyulwa kweempumlo, ukupeyinta, okanye ukuntywila nge-hot-dip galvanizing ukuphucula ukumelana nokugqwala nokwandisa ubomi benkonzo.

    5. Uhlolo loMgangatho

    Umqadi ngamnye wentsimbi ye-IPE uhlolwa ngokungqongqo, kubandakanya ukulinganiswa kobukhulu, uvavanyo loomatshini, ukuhlolwa komphezulu, kunye nohlalutyo lokwakheka kweekhemikhali.

    6. Ukupakishwa kunye nokuHanjiswa

    Imiqadi ye-IPE egqityiweyo ibotshelelwa ngeentambo zentsimbi, iphawulwe ngokweemfuno zabathengi, kwaye ipakishwe ngokukhuselekileyo ukuze ithunyelwe kwisikhongozeli okanye ngobuninzi kwihlabathi liphela.

    inkqubo_img_01

    Uhlolo loMgangatho

    I-Royal Steel Group isebenzisa iinkqubo ezingqongqo zokulawula umgangatho ukuqinisekisa ukuba yonke imiqadi yentsimbi ye-IPE iyahlangabezana neemfuno zamazwe ngamazwe:

    Uvavanyo lokuQanjwa kweeKhemikhali: Qinisekisa izinto zentsimbi ukuqinisekisa ukuthotyelwa kwemigangatho ye-EN 10025 kunye neendidi ezifunekayo ezifana ne-S235, S275, kunye ne-S355.

    Uvavanyo lwePropati yoMatshini: Jonga amandla okuvelisa, amandla okutsalwa, ubude, kunye nokusebenza kwempembelelo ukuqinisekisa ukuthembeka kwesakhiwo.

    Uvavanyo lobukhulu: Linganisa ubude bemitha, ububanzi beflange, ubukhulu bewebhu, ubude, ubunzima, kunye nokuthe tye ukuze kuhlangatyezwane neemfuno ezichaziweyo.

    Ukuhlolwa komphezulu: Jonga ukuba akukho mifantu, umhlwa, imikrwelo, kunye nezinye iziphene zomphezulu ukuqinisekisa umgangatho wemveliso.

    Uvavanyo lwe-Ultrasonic (Ukhetho): Fumana iziphene zangaphakathi kwaye uqinisekise ukuthembeka komqadi wentsimbi.

    Uhlolo lokugqibela kunye neSatifikethi: Nika iSatifikethi soVavanyo lweMill (MTC), iingxelo zokuhlolwa, kunye namaxwebhu omgangatho ngaphambi kokuba uthunyelwe.

    Iimveliso ziyahambelana nemigangatho yamazwe ngamazwe kuquka:

    1）I-EN 10025
    2）Inkqubo yoLawulo loMgangatho ye-ISO 9001
    3） Iimfuno zobugcisa eziphathelele umthengi

    Uvavanyo lomgangatho we-H Beam
    H型钢 验货图3

    Isicelo Esiphambili

    1. Izakhiwo zeSitayile seNsimbi:Imiqadi yentsimbi ye-IPE isetyenziswa kakhulu kwiindawo zokugcina impahla, kwiifektri, kwiindawo zokusebenzela, nakwizakhiwo zorhwebo njengezinto eziphambili ezithwala umthwalo kwizakhiwo ezizinzileyo nezihlala ixesha elide.

    2. Izixhobo zoshishino:Zisetyenziswa kakhulu kumaqonga oomatshini, imigca yemveliso, iifreyimu zenkxaso, kunye nezakhiwo zezixhobo zoshishino ngenxa yamandla azo aphezulu kunye nokuthembeka.

    3. Iiprojekthi zoKwakha:Imiqadi ye-IPE isetyenziselwa ukwakha izakhelo, izixhaso zomgangatho, izakhiwo zophahla, iikholamu, kunye nezinye izinto zokwakha kulwakhiwo lwezindlu nezorhwebo.

    4. Iibhulorho kunye neZiseko zoPhuhliso:Ngenxa yomthamo obalaseleyo wokuthwala umthwalo, imiqadi yentsimbi ye-IPE ifanelekile kwiibhulorho, iindlela zokuhamba, amaqonga, kunye neeprojekthi zeziseko zothutho.

    5. Iiprojekthi Zokwenziwa Kwentsimbi:Amacandelo e-IPEinokusikwa, idityaniswe, kwaye yenziwe ibe zizakhiwo ezenzelwe wena, nto leyo eyenza ukuba ibe zilungele iiprojekthi zobunjineli ezifuna izisombululo zoyilo eziguquguqukayo.

    I-OIP (4)_
    isicelo se-astm-a992-a572-h-beam-application-royal-steel-group-3
    isicelo se-astm-a992-a572-h-beam-application-royal-steel-group-4
    I-OIP (5)_

    Inzuzo yeRoyal Steel Group (Kutheni iRoyal Group ibalasele kubathengi baseMelika?)

    I-ROYAL-GUATEMALA (1)_1
    Umfanekiso_3 (1)

    1) IOfisi yeSebe - Inkxaso ngeSpanish, uncedo ngeenkqubo zerhafu, njl.njl.

    2) Malunga neetoni ezingama-5,000 zesitokhwe esikhoyo, kunye nobukhulu obahlukeneyo

    i-beam_

    3) Ihlolwe ziiarhente ezigunyazisiweyo ezifana neCCIC, SGS, BV, kunye neTUV.

    Ukupakishwa kunye nokuthunyelwa

    1. Ukupakisha Okuqhelekileyo Kweebhanti:Imiqadi yentsimbi ye-IPE ibotshelelwe ngeentambo zentsimbi ezinamandla ukuqinisekisa uzinzo nokuthintela intshukumo ngexesha lokuthuthwa.

    2. Amanyathelo okukhusela:Izigqubuthelo zeplastiki, izinto ezingangeni manzi, kunye nokhuselo olusecaleni zingasetyenziselwa ukukhusela umphezulu wentsimbi ekufuma, imikrwelo, kunye nomonakalo.

    3. Ukumakishwa okwenzelwe wena:Iphakheji nganye inokuphawulwa ngolwazi lwemveliso, kubandakanya ubungakanani, inqanaba, ubungakanani, kunye neemfuno zabathengi ukuze kube lula ukuyiqonda.

    4. Iindlela zoThutho:Imiqadi yentsimbi ye-IPE ingathunyelwa ngesikhongozeli, inqanawa enkulu, okanye ilori ngokwenani leodolo, indawo ekuyiwa kuyo, kunye neemfuno zeprojekthi.

    5. Amaxwebhu okuthumela ngaphandle:Sinikezela ngamaxwebhu apheleleyo okuthumela ngaphandle, kuquka iSitifiketi soVavanyo lweMill (MTC), uluhlu lokupakisha, i-invoyisi yorhwebo, kunye neengxelo zokuhlolwa ukuxhasa ukususwa kwempahla ngendlela ethe tye.

    H型钢发货1
    ukuhanjiswa kwe-h-beam
    Umqadi we-H2
    Umqadi we-H3

    FAQ

    Q1: Ngaba ii-IPE Steel Beams zingenziwa ngokwezifiso?

    A: Ewe. Sinikezela ngeenkonzo zokucubungula ezenzelwe wena kuquka ukusika, ukubhola, ukuwelda, ukupeyinta, ukufaka i-galvanizing, kunye nokwenza izinto ngokusekelwe kwimizobo yabathengi.

    Umbuzo 2: Ngawaphi amabakala entsimbi afumanekayo kwimiqadi ye-IPE?

    A: Sibonelela ngemisebe ye-IPE kwi-S235JR, S275JR, S355JR, kunye nezinye iiklasi ngokwemigangatho yamazwe ngamazwe kunye neemfuno zabathengi.

    Umbuzo 3: Iiplagi zentsimbi ze-IPE zipakishwa njani ukuze zithunyelwe kwamanye amazwe?

    A: Imiqadi ye-IPE ipakishwe kwiibhanti zentsimbi ezomeleleyo ezineentambo zentsimbi, izinto zokukhusela, kunye neempawu ezenziwe ngokwezifiso ukuqinisekisa ukuthuthwa okukhuselekileyo.

    Umbuzo 4: Zeziphi izatifikethi onokuzibonelela ngee-IPE Steel Beams?

    A: Sibonelela ngeeSatifikethi zoVavanyo lweMill (MTC), iingxelo zokwakheka kweekhemikhali, iingxelo zovavanyo loomatshini, kunye namaxwebhu okuhlola ngokweemfuno zabathengi.

    Umbuzo 5: Ziziphi iindlela zokuthumela ii-IPE Steel Beams?

    A: Sixhasa ukuthunyelwa kwempahla kwihlabathi liphela ngesikhongozeli, inqanawa enkulu, kunye nemigaqo yorhwebo equka i-FOB, i-CIF, i-CFR, kunye ne-DDP/DDU.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso