Inqwaba yePhepha leNsimbi eliQokelelweyo eliShushu elinohlobo lwe-U/Z II III IIIA IV VL

Inqwaba yePhepha leNsimbi eliQokelelweyo eliShushu elinohlobo lwe-U/Z III IIIA IV VL Umfanekiso obonisiweyo
  • Inqwaba yePhepha leNsimbi eliQokelelweyo eliShushu elinohlobo lwe-U/Z II III IIIA IV VL
  • Inqwaba yePhepha leNsimbi eliQokelelweyo eliShushu elinohlobo lwe-U/Z II III IIIA IV VL
  • Inqwaba yePhepha leNsimbi eliQokelelweyo eliShushu elinohlobo lwe-U/Z II III IIIA IV VL
  • Inqwaba yePhepha leNsimbi eliQokelelweyo eliShushu elinohlobo lwe-U/Z II III IIIA IV VL
  • Inqwaba yePhepha leNsimbi eliQokelelweyo eliShushu elinohlobo lwe-U/Z II III IIIA IV VL
  • Inqwaba yePhepha leNsimbi eliQokelelweyo eliShushu elinohlobo lwe-U/Z II III IIIA IV VL

Inkcazo emfutshane:

Inqwaba yeshiti yentsimbi egoqwe ngobushushu yindawo edibanisayo enamandla kakhulu, exhaphakileyo kubunjineli bezolwandle kunye nokuxhasa isiseko kunye nokwakhiwa kodonga olugcinayo. Xa kuthelekiswa neenqwaba ezenziwe ngokubanda, inqwaba yeshiti egoqwe ngobushushu inokuqina okuphezulu, imodulus ephezulu yecandelo, kunye nokusebenza okungcono kokuthintela amanzi.

I-China Royal Steel ibonelela ngokukhetha okupheleleyo kwenqwaba yephepha lohlobo lwe-U kunye ne-Z, ikwayiModel Type II, Type III, Type IIIA, Type IV kunye ne-VL eqhelekileyo, kwimisebenzi yexeshana neyesigxina.


  • Igama lebrand:Intsimbi yasebukhosini yaseTshayina
  • Ibanga lentsimbi:A36/A572 Gr50/A992/S355GP/SY295/SY390/Q235B/Q355B
  • Umgangatho wemveliso:I-ASTM / EN / JIS /GB
  • Izatifikethi:ISO9001, BV, CE
  • Ixesha lokuhlawula:30%TT+70%
  • I-MOQ:Iitoni ezili-10
  • Ixesha lokuzisa:Iintsuku ezisi-7 ukuya kwezili-15
    • Thumela i-imeyile kuthi I-WhatsApp

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iinkcukacha zeMveliso

    Uphawu Inkcazo
    Umgangatho I-ASTM A328 / EN 10248 / JIS A5528 / GB/T 29737
    Ibanga I-ASTM A572 Gr.50 / Q235B / Q345B / SY295 / SY390 / S235JR / S275JR
    Uhlobo Iinqwaba zephepha ze-U-Type / Z-Type / Larssen
    Ukuvelisa Inqwaba yePhepha leNsimbi eQokelelweyo/eyenziwe ngoBubandayo
    Ubude 6m – 18m (Ubude obuqhelekileyo buyafumaneka)
    Ububanzi 200mm – 900mm (Kuxhomekeke kwiProfayili)
    Ubukhulu 4mm – 12mm
    Umphezulu Ukugqitywa kweMill / Igqunywe ngeCoating / Ishushu-Dip egalelwe ngeGalvani
    Isitokhwe Esilungeleyo Iitoni ezingaphezu kwama-80000 ziyafumaneka
    Ithunyelwe Ku Umzantsi-mpuma we-Asia / uMbindi Mpuma / iMelika / iYurophu
    Ukuhanjiswa Ixabiso Elithe Ngqo Lomzi-mveliso, Iintsuku Ezisi-7–15
    IPHEPHA LENTSIMBI LE-ASTM PILE2 (1)
    IPHEPHA LENTSIMBI LE-ASTM 1 (1)
    inqwaba yeshiti yentsimbi7 (1) (1)
    inqwaba yeshiti yentsimbi6 (1) (1)
    Jonga isitokhwe samva nje kunye nexabiso

    Isakhiwo seekhemikhali zenqwaba yeshiti yentsimbi

    Umgangatho Ibanga C (%) Mn (%) I-P (%) S (%) I-Si (%)
    GB/T 29737 Q235B ≤0.22 ≤1.40 ≤0.035 ≤0.035 ≤0.35
    GB/T 29737 Q345B ≤0.20 1.00–1.60 ≤0.035 ≤0.035 ≤0.50
    I-ASTM A36 ≤0.25 0.80–1.20 ≤0.04 ≤0.05 0.15–0.40
    I-ASTM I-A572 Gr.50 ≤0.23 0.67–1.65 ≤0.035 ≤0.04 ≤0.50
    I-ASTM A992 ≤0.23 0.50–1.70 ≤0.035 ≤0.045 ≤0.50
    EN 10248 S235JR ≤0.17 ≤1.40 ≤0.035 ≤0.035 ≤0.35
    EN 10248 S275JR ≤0.22 ≤1.50 ≤0.035 ≤0.035 ≤0.55
    EN 10248 S355JR ≤0.22 ≤1.60 ≤0.035 ≤0.035 ≤0.55
    I-JIS SY295 ≤0.22 0.50–1.60 ≤0.035 ≤0.035 0.20–0.35
    I-JIS I-SY390 ≤0.22 0.80–1.60 ≤0.035 ≤0.035 0.20–0.50
    I-JIS I-SY490 ≤0.23 0.90–1.60 ≤0.035 ≤0.035 0.20–0.55

    Iipropati zoomatshini zeNqwaba yePhepha leNsimbi

    Umgangatho Ibanga Amandla okuKhula (i-MPa) Amandla okuThamba (MPa) Ukwandiswa (%) Ubunzima (HB)
    GB/T 29737 Q235B 235 370–500 ≥26 120–160
    GB/T 29737 Q345B 345 470–630 ≥20 140–180
    I-ASTM A36 250 400–550 20 119–159
    I-ASTM I-A572 Gr.50 345 450–620 18–21 140–180
    I-ASTM A992 345 450–620 18–22 140–180
    EN 10248 S235JR 235 360–510 ≥26 120–160
    EN 10248 S275JR 275 430–580 ≥23 130–170
    EN 10248 S355JR 355 470–630 ≥20 140–180
    I-JIS SY295 295 430–570 ≥22 130–170
    I-JIS I-SY390 390 520–650 ≥20 140–180
    I-JIS I-SY490 490 560–690 ≥18 150–190

    Amanqaku:

    Amandla Okuvelisa I-ReH = Amandla Okuvelisa Imveliso

    Amandla okuThatha Rm = Amandla okuThatha

    Ukwandiswa A = Ukwandiswa (ipesenti yokwandiswa emva kokuqhekeka)

    Ubulukhuni = Ubulukhuni bukaBrinell, i-HB imele ubulukhuni bukaBrinell.

    Ubungakanani bePile yePhepha leNsimbi

    Icandelo Ubukhulu Indawo yeCandelo Ubunzima Umzuzu Imodulus
    Ububanzi Ubude Ubukhulu Inqwaba Udonga ukungabi namandla yecandelo
    w h t    
    mm Mm mm cm2/inqwaba kg/m kg/m2 cm4/m cm3/m
    ⅠA 400 85 8 45.21 35.5 88.8 4500 529
    Ⅱ 400 100 10.5 61.2 48 120 8740 874
    Ⅲ 400 125 13 76.4 60 150 16800 1340
    ⅢA 400 150 13.1 74.4 58.4 146 22800 1520
    Ⅳ 400 170 15.5 97 76.1 190 38600 2270
    ⅤL 500 200 24.3 133.8 105 210 63000 3150
    ⅥL 500 225 27.6 153 120 240 86000 3820
    ⅡW 600 130 10.3 78.7 61.8 103 13000 1000
    ⅢW 600 180 13.4 104 81.6 136 32400 1800
    ⅣW 600 210 18 135.3 106 177 56700 2700

     

    Ngaba ufuna ukwazi okungakumbi malunga neenkcukacha kunye nobukhulu beenqwaba zesinyithi?

    Khuphela ikhathalogu epheleleyo

    Ukutshixa iiPile zeSheet yentsimbi kunye nokusebenza okungangeni manzi

    inqwaba yeshiti-yentsimbi-egayiweyo1

    Uyilo: Inqwaba yePhepha leNsimbi eQhagamshelanayo, ukuvuleka kwamanzi ≤1×10⁻⁷ cm/s

    Amazwe aseMelika: Ihlangabezana nomgangatho we-ASTM D5887 weLiner yokunciphisa ukuvuza phantsi kweeDrums

    Mzantsi-mpuma weAsia: Ilungele ukuvuza kwamanzi angaphantsi komhlaba ngamaxesha emvula ashushu

    Inkqubo yokuvelisa iinqwaba zeeshiti zentsimbi

    Inyathelo Inkcazo
    1. Ukwenza iNsimbi Ukunyibilikisa izinto ezikrwada kwi-Electric Arc Furnace (EAF) okanye kwi-Basic Oxygen Furnace (BOF) ukuze kuveliswe iibhelethi zentsimbi.
    2. Ukuphosa Ukuphoswa rhoqo kweebhilethi zentsimbi kwiislabhu, iintyatyambo, okanye iibhilethi kuxhomekeke kuhlobo lwemveliso.
    3. Ukuqengqeleka Okushushu/Ukwenza Okubandayo Ishushu-Iqengqelekile:Ukufudumeza iislabhu nokuqengqeleka kwii-H-beams, iisheet piles, okanye iiplates.
    Eyenziwe Ngobandayo:Ukugoba okanye ukucinezela amaphepha entsimbi kwiiprofayili zohlobo lwe-U, uhlobo lwe-Z, okanye iLarssen kubushushu begumbi.
    4. Ukusika nokubumba Ukusika intsimbi ukuya kubude obufunekayo (6–18m) kunye nokubumba iiprofayili ngokuchanekileyo ngokwemigangatho yoyilo (ASTM / EN / JIS / GB).
    5. Unyango Lomphezulu Ukugqitywa kwesinyithi, kupeyintwe/kugqunywe ngentsimbi, okanye kufakwe i-hot-dip galvanised ukukhusela ukugqwala kunye nobomi benkonzo obude.
    6. Ulawulo loMgangatho kunye noHlolo Uvavanyo loomatshini kunye neekhemikhali, ukuhlolwa kobukhulu, kunye nokuhlolwa komgangatho womphezulu ukuze kuhlangatyezwane nemigangatho efanelekileyo.
    7. Ukupakisha kunye nokuthumela Ukubopha, unyango olungenamhlwa ukuba kuyimfuneko, kwaye lulungele ukuthunyelwa ngqo kwifektri (ukuhanjiswa kweentsuku ezisi-7–15).
    Inkqubo yokuvelisa inqwaba yeshiti yentsimbi

    Umphezulu weNqwaba yePhepha leNsimbi

    u_ (1)
    112

    Amazwe aseMelika:HDG njenge-ASTM A123 (uboya obuncinci be-zinc ≥ 85 µm); Uboya be-3PE abunyanzelekanga; zonke iziphelo ziyahambelana ne-RoHS.

    Mzantsi-mpuma weAsia:Ubukhulu be-hot dip galvanized yi-hollyh (ngaphezulu kwe-100μm), kwaye kufakwa iileya ezimbini ze-epoxy coal tar coating, ingatshizwa ngetyuwa ivavanywe iiyure ezingama-5000 ngaphandle kokugqwala, yeyona ilungileyo ekusetyenzisweni kwendalo yaselwandle eshushu.

    ISICELO

    Ubunjineli boLwandle nolwaseManzini– Kwiindonga ze-quay, ii-piers kunye nee-docks, izakhiwo zaselwandle ezisemgangathweni ophezulu nezihlala ixesha elide zibalulekile.

    Uzinzo lweBhanki kunye noLawulo lweZikhukula– Ikhusela unxweme lomlambo kunye neengcango ekukhukulisekeni komhlaba nakwizikhukula.

    Iindonga Zokugcina Izinto Nokwemba– Igcina amagumbi angaphantsi komhlaba kunye neendawo ezivunjululwe ngokukhuselekileyo, kuquka ii-cofferdams kunye nee-shoring.

    Iiprojekthi zeMizi-mveliso kunye neZiseko zoPhuhliso– Uqinisekisa iziseko ezizinzileyo zeebhulorho, iindlela ezinkulu, izityalo zamandla, kunye nezityalo zokwenza izinto.

    Ulwakhiwo lwexeshana/olusisigxina– Iingqumba ezibandayo zemisebenzi yexeshana; iingqumba ezigutyungelweyo ezishushu zeziseko zamanzi anzulu okanye ezithwala umthwalo onzima.

    Inqwaba yeshiti yentsimbi egoqwe ngobushushu efana no-U (5)

    Kutheni Ukhetha Intsimbi Yasebukhosini YaseTshayina Yeenqwaba Zeeshiti Zensimbi

    1. Uluhlu olubanzi lwamacandelo

    Uluhlu olubanzi lweeprofayili ezineempawu ezahlukeneyo zejiyometri, ezivumela ukukhethwa kwesisombululo esiphuculiweyo ngobuchwephesha nangokwezoqoqosho kwiprojekthi nganye. Isitokhwe esiqhelekileyo seenqwaba zamaphepha ezihot-rolled sheet ze-U-type sidlulaIitoni ezingama-80,000.

    2. Ukusebenza kakuhle kwesakhiwo

    Ukudibanisa iiprofayili zamaza anzulu kunye neeflange ezixineneyo kuqinisekisa amandla abalaseleyo kunye nomthamo ophezulu wokuthwala umthwalo.

    3. Uyilo olungasetyenziswa kwakhona

    Uyilo lwecandelo elilinganayo lwenza kube lula ukukhutshelwa nokuphinda kusetyenziswe, kunciphisa iindleko zeprojekthi iyonke kwaye kuphuculwe uzinzo.

    4. Izisombululo eziHlanganisiweyo kwiFektri

    Iingqumba zingahlanganiswa kwangaphambili zibe ngababini kwindawo yokusila, ukuqinisekisa ukusebenza kakuhle kokufakelwa, ukulungelelaniswa okuphuculweyo, kunye nokusebenza ngcono kwindawo yokusebenza.

    Abathengi beza kumzi-mveliso ukuze bahlole iinqwaba zeeshiti zentsimbi
    ishidi lesinyithi ipile-intsimbi yasebukhosini yaseTshayina2 (1)
    ishidi lesinyithi inqwaba-intsimbi yasebukhosini yaseTshayina1 (1)
    FUMANA IXABISO LAMVA

    UKUPAKISHA NOKUTHUMELA

    Ukupakisha okuqhelekileyo kokuthumela ngaphandle:Iinqwaba zeshiti zentsimbiziqiniswe ngokuqinileyo ngeentambo zentsimbi kwaye zibotshelelwe ukuze ziqinise kwaye zithintele ukuguguleka kwendlela yokuhamba.

    Ukhuseleko lokulwa nokugqwala:Ioyile engangeni mhlwa, ukusonga ngeplastiki okanye ukupakishwa okungangeni manzi kunokubonelelwa ngeenkonzo zokuthutha umgama omde kunye nolwandle.

    Iinkonzo Zokupakisha Ezilungiselelwe Ngokwesiko:Ukupakisha kungenziwa ngokwezifiso ukuze kuhambelane neemfuno zeprojekthi, njengokuphawula okukhethekileyo, ukulebhelisha okanye naziphi na iindlela zokukhusela.

    Ukusebenza kakuhle kokulayisha:Iingcebiso zobungcali zokulayisha ukuze kwandiswe indawo yesikhongozeli (20GP / 40GP / inqanawa enkulu) enokunciphisa iindleko zokuthutha.

    Ukuhanjiswa Okukhawulezileyo:Kukho isitokhwe esilungele ukuhanjiswa ngaphandle kweshelufu kwiintsuku ezisi-7-15 ukuxhasa ukungxamiseka kweprojekthi.

    Amava okuThunyelwa kweNqwelo-mali kwihlabathi liphela:Amava atyebileyo okuthumela ngaphandle eMzantsi-mpuma Asia, kuMbindi Mpuma, eMelika, eYurophu, akwenza ube noxolo lwengqondo malunga nothutho kunye namaxwebhu.

    Inqwaba yeshiti yentsimbi egoqwe ngobushushu efana no-U (7)

    FAQ

    Umbuzo 1: Yintoni umahluko phakathi kwee-Type II, III, IIIA kunye nee-IV sheet piles?

    A: Umahluko ophambili usekwe kubukhulu kunye ne-section modulus. Iintlobo eziphezulu (III, IV, VL) zibonelela ngomthamo onamandla wokuthwala umthwalo kwaye zifanelekile kwiiprojekthi ezinzima.

    Umbuzo 2: Yintoni inzuzo yeenqwaba zeshiti ezigoqiweyo ezishushu?

    A: Iinqwaba zeeshiti ezigoqiweyo ezishushu zinika ukuqina okungcono, ukuvaleka okuqinileyo, kwaye zilungele ukusetyenziswa ixesha elide kunye nolwandle.

    Q3: Ngaba ungabonelela ngobukhulu obuqhelekileyo?

    A: Ewe, sixhasa ubude, ubukhulu, kunye nokwaleka okwenziwe ngokwezifiso ngokusekelwe kwiimfuno zeprojekthi.

    Q4: Lithini ixesha lakho lokuhambisa?

    A: Ubungakanani obuqhelekileyo bufumaneka kwiintsuku ezisi-7 ukuya kwezili-15, kuxhomekeke kwisitokhwe kunye nomthamo weodolo.

    Q5: Ngowuphi umgangatho owubonelelayo?

    A: Sibonelela ngeenqwaba zamaphepha eziqinisekisiweyo ze-ASTM, EN, kunye ne-JIS kunye neengxelo ezipheleleyo zokuhlolwa.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso