Iprofayili ye-HEA HEB H Beam yesakhiwo se-Carbon Steel H Iron Beam

Iprofayili ye-HEA HEB H Beam yesakhiwo se-Carbon Steel H Iron Beam Umfanekiso obonisiweyo
  • Iprofayili ye-HEA HEB H Beam yesakhiwo se-Carbon Steel H Iron Beam
  • Iprofayili ye-HEA HEB H Beam yesakhiwo se-Carbon Steel H Iron Beam
  • Iprofayili ye-HEA HEB H Beam yesakhiwo se-Carbon Steel H Iron Beam
  • Iprofayili ye-HEA HEB H Beam yesakhiwo se-Carbon Steel H Iron Beam
  • Iprofayili ye-HEA HEB H Beam yesakhiwo se-Carbon Steel H Iron Beam

Inkcazo emfutshane:

Iimpawu zentsimbi enobume be-H ziquka amandla aphezulu, uzinzo oluhle kunye nokumelana okuhle kokugoba. Inxalenye yayo imile okwe-"H", enokusasaza amandla ngempumelelo kwaye ifanelekile kwizakhiwo ezithwala imithwalo emikhulu. Inkqubo yokuvelisa intsimbi enobume be-H yenza ukuba ibe nokudityaniswa okungcono kunye nokucutshungulwa ngcono, kwaye yenza kube lula ukwakhiwa kwindawo. Ukongeza, intsimbi enobume be-H ilula ngobunzima kwaye inamandla aphezulu, nto leyo enokunciphisa ubunzima besakhiwo kwaye iphucule uqoqosho kunye nokhuseleko lwesakhiwo. Isetyenziswa kakhulu kwiindawo ezifana nokwakha, iibhulorho kunye nokuveliswa koomatshini, kwaye ibe yinto efunekayo kubunjineli banamhlanje.


  • Umgangatho: EN
  • Ubukhulu beFlange:4.5-35mm
  • Ububanzi beFlange:100-1000mm
  • Ubude:5.8m, 6m, 9m, 11.8m, 12m okanye ngokwemfuno yakho
  • Ixesha lokuziswa:I-FOB CIF CFR EX-W
  • Qhagamshelana nathi:+86 13652091506
  • : [email protected]
    • Thumela i-imeyile kuthi I-WhatsApp

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Intsimbi Emile okwe-H ye-ASTM
    FUMANA IXABISO LOKUTHENGISWA KWEMALI NGAPHAKATHI KWEEYURE EZINGAMA-24

    INKQUBO YOKUVELISA IMVELISO

    Le ilandelayo yinkqubo eqhelekileyo yokwenza umgangatho wangaphandle we-hollow section H-beam:

    Ukulungiswa kwezinto eziluhlaza: Izinto zokwenza icandelo lentsimbi ye-H-beam zihlala ziyi-billet yentsimbi. Ukucoca nokufudumeza i-billet yentsimbi ukuze isebenze kwaye ibunjwe kwixesha elizayo.

    Inkqubo yokuqengqeleka ngobushushu: Ukucutshungulwa kwe-billet yentsimbi eshushu kuyatshiswa. Xa ifudunyezwa ifikelele kwimeko yokuqengqeleka, i-billet yentsimbi iqengqeleka kwi-hot rolling mill, ngothotho lwee-roller kwaye yenziwe ibe kufutshane ne-H-shape.

    Ukusebenza ngokubandayo (ukhetho): Intsimbi ye-H beam eqengqelekayo eshushu isenokusebenza ngokubanda, njengokuqengqeleka okubandayo, ukuzoba, njl. ukuphucula ukuchaneka kunye nomgangatho womphezulu wentsimbi ye-H beam kwezinye iinkqubo.

    Ukusika kunye nokugqiba: Iitshaneli ze-H ezenziwe ngeroli kufuneka zinqunyulwe zigqitywe ngokobungakanani nobude ukuze zihlangabezane neemfuno ezithile zabathengi emva kokuqengqeleka nokusebenza ngokubandayo.

    Unyango lomphezulu: Unyango olucocekileyo noluchasene nomhlwa lwentsimbi ye-H, ukuqinisekisa umgangatho womphezulu kunye nokumelana nomhlwa kweemveliso.

    Ukuhlolwa kunye nokupakisha: Yenza uhlolo lomgangatho kwintsimbi ye-H yemveliso kuquka umgangatho wembonakalo, ukuchaneka kobukhulu, ipropati yoomatshini njl. Emva kovavanyo, iya kupakishwa ize ithunyelwe kumthengi.

    Intsimbi Emile okwe-ASTM H (11)

    UBUKHULU BEMVELISO

    Intsimbi Emile okwe-H (2) ye-EN
    Ukutyunjwa Unt
    Ubunzima
    kg/m)    		 Icandelo Eliqhelekileyo
    ukukhulisa
    mm    		 Icandelo
    UAma
    (cm²
    W H B 1 2 r A
    HE28 AA 61.3 264.0 280.0 7.0 10.0 24.0 78.02
    A 76.4 270.0 280.0 80 13.0 24.0 97.26
    B 103 280.0 280.0 10.5 18.0 24.0 131.4
    M 189 310.0 288.0 18.5 33.0 24.0 240.2
    HE300 AA 69.8 283.0 300.0 7.5 10.5 27.0 88.91
    A 88.3 200.0 300.0 85 14.0 27.0 112.5
    B 117 300.0 300.0 11.0 19.0 27.0 149.1
    M 238 340.0 310.0 21.0 39.0 27.0 303.1
    HE320 AA 74.3 301.0 300.0 80 11.0 27.0 94.58
    A 97.7 310.0 300.0 9.0 15.5 27.0 124.4
    B 127 320.0 300.0 11.5 20.5 27.0 161.3
    M 245 359.0 309.0 21.0 40.0 27.0 312.0
    HE340 AA 78.9 320.0 300.0 85 11.5 27.0 100.5
    A 105 330.0 300.0 9.5 16.5 27.0 133.5
    B 134 340.0 300.0 12.0 21.5 27.0 170.9
    M 248 377.0 309.0 21.0 40.0 27.0 315.8
    HE360 AA 83.7 339.0 300.0 9.0 t2.0 27.0 106.6
    A 112 350.0 300.0 10.0 17.5 27.0 142.8
    B 142 360.0 300.0 12.5 22.5 27.0 180.6
    M 250 395.0 308.0 21.0 40.0 27.0 318.8
    HE400 AA 92.4 3780 300.0 9.5 13.0 27.0 117.7
    A 125 390.0 300.0 11.0 19.0 27.0 159.0
    B 155 400.0 300.0 13.5 24.0 27.0 197.8
    M 256 4320 307.0 21.0 40.0 27.0 325.8
    HE450 AA 99.8 425.0 300.0 10.0 13.5 27.0 127.1
    A 140 440.0 300.0 11.5 21.0 27.0 178.0
    B 171 450.0 300.0 14.0 26.0 27.0 218.0
    M 263 4780 307.0 21.0 40.0 27.0 335.4
    Ukumisela Iyunithi
    Ubunzima
    kg/m)    		 Icandelo Eliqhelekileyo
    Ububanzi
    (mm)    		 ICandelo
    Indawo
    (cm²)
    W H B 1 2 r A
    HE50 AA 107 472.0 300.0 10.5 14.0 27.0 136.9
    A 155 490.0 300.0 t2.0 23.0 27.0 197.5
    B 187 500.0 300.0 14.5 28.0 27.0 238.6
    M 270 524.0 306.0 21.0 40.0 27.0 344.3
    HE550 AA t20 522.0 300.0 11.5 15.0 27.0 152.8
    A 166 540.0 300.0 t2.5 24.0 27.0 211.8
    B 199 550.0 300.0 15.0 29.0 27.0 254.1
    M 278 572.0 306.0 21.0 40.0 27.0 354.4
    HE60 AA t29 571.0 300.0 t2.0 15.5 27.0 164.1
    A 178 500.0 300.0 13.0 25.0 27.0 226.5
    B 212 600.0 300.0 15.5 30.0 27.0 270.0
    M 286 620.0 305.0 21.0 40.0 27.0 363.7
    HE650 AA 138 620.0 300.0 t2.5 16.0 27.0 175.8
    A 190 640.0 300.0 t3.5 26.0 27.0 241.6
    B 225 660.0 300.0 16.0 31.0 27.0 286.3
    M 293 668.0 305.0 21.0 40.0 27.0 373.7
    HE700 AA 150 670.0 300.0 13.0 17.0 27.0 190.9
    A 204 600.0 300.0 14.5 27.0 27.0 260.5
    B 241 700.0 300.0 17.0 32.0 27.0 306.4
    M 301 716.0 304.0 21.0 40.0 27.0 383.0
    HE800 AA 172 770.0 300.0 14.0 18.0 30.0 218.5
    A 224 790.0 300.0 15.0 28.0 30.0 285.8
    B 262 800.0 300.0 17.5 33.0 30.0 334.2
    M 317 814.0 303.0 21.0 40.0 30.0 404.3
    HE800 AA 198 870.0 300.0 15.0 20.0 30.0 252.2
    A 252 800.0 300.0 16.0 30.0 30.0 320.5
    B 291 900.0 300.0 18.5 35.0 30.0 371.3
    M 333 910.0 302.0 21.0 40.0 30.0 423.6
    I-HEB1000 AA 222 970.0 300.0 16.0 21.0 30.0 282.2
    A 272 0.0 300.0 16.5 31.0 30.0 346.8
    B 314 1000.0 300.0 19.0 36.0 30.0 400.0
    M 349 1008 302.0 21.0 40.0 30.0 444.2

    Masikunike ikowuteshini yasimahla iiyure ezingama-24 ngosuku okanye uthethe nathi malunga neminye imibuzo enxulumene nemveliso!

    COFA APHA
    Intsimbi Emile okwe-H ye-EN

    EI-NHIntsimbi Emile

    Udidi: EN10034:1997 EN10163-3：2004

    Inkcazo: I-HEA HEB kunye ne-HEM

    Umgangatho: EN

     

    IIMBONAKALO

    Amandla aphezulu: Uyilo lwecandelo elinqamlezileyo leentsimbi ze-H-beam lenza libe namandla aphezulu okugoba kunye namandla okuthwala, ukuze lisetyenziswe kwi-larg span beam kunye ne-heavy weight beam.

    Uzinzo oluhleNgenxa yesimo secandelo elinqamlezileyo, intsimbi enomfanekiso we-H ibonakalisa uzinzo oluhle phantsi koxinzelelo kunye noxinzelelo olunceda isakhiwo ukuba sihlale sizinzile kwaye sikhuselekile.

    Ulwakhiwo olulula: Uyilo lwemilo yentsimbi enomfanekiso we-H lulula, lunokudityaniswa kakuhle ngqo kwiikholamu zentsimbi, imiqadi yentsimbi kulula ukuyidibanisa, lunceda inkqubela phambili yokwakhiwa kweprojekthi.

    Ukusetyenziswa kwezixhobo eziphezulu: Uyilo lwemilo yentsimbi ye-H-beam lunokudlala indima ekusebenzeni kwentsimbi, lunciphise inkunkuma yezinto, luluncedo kulondolozo lwezixhobo kunye nokukhuselwa kwendalo.

    Isicelo esibanziIntsimbi ye-H-beam iyasebenza kuzo zonke iintlobo zezakhiwo, ukwakhiwa kweebhulorho, ukwenziwa koomatshini njalo njalo, Ithemba lophuhliso libanzi kakhulu.

    Ii-H-Beams ezisemgangathweni zangaphandle ngokubanzi zinamandla aphezulu, uzinzo oluhle kunye nolwakhiwo olulula. Njengento ebalulekileyo yentsimbi yokwakha, isetyenziswa kakhulu kwiiprojekthi ezahlukeneyo.

    Intsimbi Emile okwe-H ye-ASTM (4)

    UHLOLO LWEMVELISO

    Ukuqinisekisa umgangatho wemveliso, ukhuseleko, kunye nokuthobela imigangatho yamazwe ngamazwe, i-H Beams kufuneka ihlolwe ngokupheleleyo, igubungela le miba ilandelayo:

    1. Umgangatho weNkangeleko
    Umphezulu we-H Beams kufuneka uthambe, ucoceke, kwaye ungabi naziphene ezibonakalayo ezifana nokuqhekeka, ukuqhekeka, imikrwelo, umhlwa ogqithisileyo, okanye ezinye iziphene zomphezulu. Inkangeleko iyonke kufuneka ihlangabezane nemigangatho efanelekileyo kunye neenkcukacha zabathengi.

    2. Ukuchaneka kobukhulu
    Imilinganiselo ephambili equka ubude, ukuphakama, ububanzi beflegi, ubukhulu bewebhu, kunye nobukhulu beflegi kufuneka ihambelane nemigangatho efanelekileyo kunye neemfuno zeprojekthi ukuqinisekisa ukusebenza okuchanekileyo kwesakhiwo.

    3. Ukuthe tye kunye nokugoba
    Ukugoba kwe-H Beams kufuneka kuhlale ngaphakathi komlinganiselo ovumelekileyo. Ukulinganisa kwenziwa ukuqinisekisa ukuthe tye kwe-beam kunye nokulungelelaniswa okulinganayo ngokwemigangatho yoshishino.

    4. Ulawulo lokujika
    Ukuguqulwa kwe-twist kufuneka kuhlolwe ukuqinisekisa ukulungelelaniswa okuthe nkqo kunye nozinzo lwesakhiwo. Ukuguqulwa okugqithisileyo kunokuchaphazela ukufakwa kunye nokusebenza kokuthwala umthwalo.

    5. Ukunyamezela Ubunzima
    Ubunzima boqobo bomqadi kufuneka buhambelane nemigangatho echaziweyo kunye nokuphambuka okuvumelekileyo, ukuqinisekisa ukuhambelana komgangatho wezinto kunye nokubalwa kwesakhiwo.

    6. Uhlalutyo loBume beeKhemikhali
    Izinto zekhemikhali ezifana nekhabhoni, i-manganese, i-phosphorus, kunye ne-sulfur ziyavavanywa ukuqinisekisa ukuthotyelwa kwemigangatho yezinto eziphathekayo, ingakumbi xa kudityaniswa, kusenziwa, nakwizicelo ezikhethekileyo.

    7. Uvavanyo lwePropati yoomatshini
    Ukusebenza koomatshini kubandakanya amandla okukhupha, amandla okutsalwa, ukunwebeka, kunye nokumelana nempembelelo kuyavavanywa ukuqinisekisa ukuba umqadi uyahlangabezana neemfuno ezifunekayo zesakhiwo.

    8. Uvavanyo Olungonakalisiyo (NDT)
    Uvavanyo lwe-ultrasound okanye ezinye iindlela zokuhlola ezingonakalisiyo zinokwenziwa ukuze kufunyanwe iziphene zangaphakathi nokuqinisekisa ukuthembeka nokuthembeka kwesakhiwo ngokubanzi.

    9. Ukuhlolwa kokuPakisha nokuMakisha
    Ukupakisha kunye nophawu lwemveliso kufuneka kuhambelane nemigangatho yokuthumela ngaphandle kunye nokuthutha, kunye nokuchonga ngokucacileyo inqanaba, ubungakanani, inani lobushushu, kunye nobungakanani ukuze kulandelelwe kwaye kuhanjiswe ngokukhuselekileyo.

    Ukuqinisekisa umgangatho

    Iinkqubo zokuhlola ezipheleleyo ziqinisekisa ukuba yonke i-H Beam iyahlangabezana nemigangatho yomgangatho wamazwe ngamazwe kunye neemfuno zabathengi, ibonelela ngokusebenza okuthembekileyo kwizicelo zokwakha, zeziseko zophuhliso, zemizi-mveliso, kunye nezobunjineli kwihlabathi liphela.

    Intsimbi Emile okwe-H (8) ye-EN

    ISICELO SEMVELISO

    Imiqadi ye-H esemgangathweni yangaphandle isetyenziswa kakhulu kushishino lokwakha noomatshini, njengale ilandelayo: Ubunjineli bezakhiwo kunye nobunjineli beebhulorho, oomatshini, ukwakhiwa kweenqanawa kunye nokwakhiwa kwesakhiwo sentsimbi.

    Intsimbi Emile okwe-H (4) ye-EN

    UKUPAKISHA NOKUTHUMELA

    Ukupakishwa kunye nokuthunyelwa kwee-H-beams zangaphandle eziqhelekileyo ngokubanzi kwenziwa ngolu hlobo lulandelayo:

    Ukupakisha: Intsimbi ye-H idla ngokupakishwa ngokwendlela yokuthumela yabathengi ukuze kuthintelwe ukonakala komphezulu. Ukupakisha okuqhelekileyo kukupakisha okungenanto, ukupakisha iipallet zomthi, ukupakisha iplastiki njalo njalo. Ngexesha lokupakisha, umphezulu wentsimbi ye-H beam akufuneki ukrwelwe kwaye ugqwale.

    Ukulebhelisha: Phawula ulwazi olucacileyo lwemveliso kumphezulu wephakheji, olufana nomzekelo, iinkcukacha, ubungakanani, njl.njl., kulula ukuchongwa nokulawulwa.

    Iyalayisha: Kukwafuneka ukunqanda ukungqubana nokuphuma komthwalo kwinkqubo yokulayisha kunye nokuthuthwa kwentsimbi ye-H beam epakishiweyo.
    Ukuthunyelwa: Khetha izixhobo zothutho ezifanelekileyo njengelori, uthutho lukaloliwe njalo njalo, kwaye ngokwesicelo sabathengi kunye nomgama, khetha indlela yothutho efanelekileyo.

    UkukhululaXa i-H steel bar ifika kwi-terminal, ukukhulula kwayo kufuneka kwenziwe ngononophelo, ukuze ingonakalisi intsimbi ye-H-beam.
    Indawo yokugcina: Gcina i-H-beam ste] kwindawo eyomileyo, enomoya opholileyo ukuthintela ukufuma okanye ezinye iimpembelelo ezimbi.

    Intsimbi Emile okwe-H ye-ASTM (9)
    Intsimbi Emile okwe-H (5) ye-EN

    AMANDLA ENKAMPANI

    Intsimbi Emile okwe-ASTM H (10)

    FAQ

    1. Zeziphi izinto ezifumanekayo ze-H Beams?

    Sinikezela ngee-H Beams kwiindidi ezahlukeneyo, kuquka i-ASTM A36, i-ASTM A572 Grade 50, i-ASTM A992, i-S235, i-S275, i-S355, i-Q235B, i-Q355B, kunye ne-SS400 ukuhlangabezana neemfuno ezahlukeneyo zeprojekthi.

    2. Zithini ubukhulu kunye nobude obuqhelekileyo be-H Beams?

    Ubude obuqhelekileyo buhlala buyi-6m kunye ne-12m, ngelixa ubude kunye nobukhulu obulungiselelwe wena bufumaneka ngokweemfuno zabathengi.

    3. Yintoni umahluko phakathi kwe-H Beam kunye ne-I Beam?

    Ii-H beams zine-flanges ezibanzi kunye nomthamo ophezulu wokuthwala umthwalo, nto leyo eyenza ukuba zilungele ukusetyenziswa kwezakhiwo ezinzima, ngelixa ii-I beams zisetyenziswa rhoqo kwinkxaso yezakhiwo ezilula.

    4. Ngaba ii-H Beams zingenziwa ngokwezifiso?

    Ewe, sinikezela ngeenkonzo ezenzelwe wena kuquka ukusika, ukubhola, ukuwelda, unyango lomphezulu, kunye nokwenziwa ngokusekelwe kwimizobo yobunjineli.

    5. Zeziphi iindlela zonyango zomphezulu ezikhoyo?

    Izinto ezifumanekayo zokugquma umphezulu ziquka umnyama (njengoko ugoqwe), upeyintiwe, ugqunywe nge-galvanized, kunye nopende oluchasene nokugqwala kuxhomekeke kwiimeko zendalo.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso