I-H Beam ASTM A36 Hot Rolled Welding I-Universal Beam Q235B Q345E I-I Beam 16Mn Channel Steel I-Galvanized H Steel Structure Steel

I-H Beam ASTM A36 Hot Rolled Welding I-Universal Beam Q235B Q345E I-I Beam 16Mn Channel Steel Galvanized H Steel Structure Intsimbi Umfanekiso obonisiweyo
  • I-H Beam ASTM A36 Hot Rolled Welding I-Universal Beam Q235B Q345E I-I Beam 16Mn Channel Steel I-Galvanized H Steel Structure Steel
  • I-H Beam ASTM A36 Hot Rolled Welding I-Universal Beam Q235B Q345E I-I Beam 16Mn Channel Steel I-Galvanized H Steel Structure Steel
  • I-H Beam ASTM A36 Hot Rolled Welding I-Universal Beam Q235B Q345E I-I Beam 16Mn Channel Steel I-Galvanized H Steel Structure Steel
  • I-H Beam ASTM A36 Hot Rolled Welding I-Universal Beam Q235B Q345E I-I Beam 16Mn Channel Steel I-Galvanized H Steel Structure Steel
  • I-H Beam ASTM A36 Hot Rolled Welding I-Universal Beam Q235B Q345E I-I Beam 16Mn Channel Steel I-Galvanized H Steel Structure Steel
  • I-H Beam ASTM A36 Hot Rolled Welding I-Universal Beam Q235B Q345E I-I Beam 16Mn Channel Steel I-Galvanized H Steel Structure Steel

Inkcazo emfutshane:

Ii-H beams ziintsimbi ezakhiweyo ezine-H cross section, ezisetyenziswa kakhulu ekwakheni, ekuveliseni izakhiwo zoshishino, iibhulorho kunye neeprojekthi zeendlela.


  • Umgangatho:I-ASTM
  • Ubukhulu beFlange:4.5-35mm
  • Ububanzi beFlange:100-1000mm
  • Ubude:5.8m, 6m, 9m, 11.8m, 12m okanye ngokwemfuno yakho
  • Ixesha lokuziswa:I-FOB CIF CFR EX-W
  • Qhagamshelana nathi:+86 13652091506
  • I-imeyile: [i-imeyile ikhuselwe]
    • Thumela i-imeyile kuthi I-WhatsApp

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Intsimbi Emile okwe-H ye-ASTM

    INKQUBO YOKUVELISA IMVELISO

    Inkqubo yokuvelisa umgangatho ongaphandleUmqadi we-Hs idla ngokuquka la manyathelo aphambili alandelayo:

     

    Ukulungiswa kwezinto eziluhlaza: Izinto eziluhlaza zokuvelisa ii-H-beams zihlala zi-billets. Ii-billets kufuneka zicocwe kwaye zifudunyezwe ukuze kube lula ukucutshungulwa nokwenziwa kwazo emva koko.

     

    Ukulungiswa kokuqengqeleka okushushu: Iibhilethi ezisandula ukuthunyelwa zithunyelwa kwi-hot rolling mill ukuze zisetyenzwe. Kwi-hot rolling mill, iibhilethi ziqengqeleka kwii-rolls ezininzi, kancinci kancinci zenza imo ye-H-beam enqamlezileyo.

     

    Ukucubungula ngokubandayo (ukhetho): Kwezinye iimeko, ukuphucula ukuchaneka kunye nomgangatho womphezulu wee-H-beams, ii-H-beams ezigoqwe ngobushushu ziya kucutshungulwa ngokubandayo, njengokuqengqeleka okubandayo kunye nokutsalwa.

     

    Ukusika nokugqiba: Emva kokuqengqeleka nokucocwa, ii-H-beams kufuneka zinqunyulwe zigqitywe ngokweemfuno zabathengi ukuze kuhlangatyezwane neemfuno ezithile zobungakanani kunye nobude.

     

    Unyango lomphezulu: Ii-H-beams ziyacocwa kwaye zithintelwe ngumhlwa ukuqinisekisa umgangatho womphezulu kunye nokumelana nokugqwala kweemveliso.

     

    Ukuhlolwa kunye nokupakishwa: Ii-H-beams ezivelisiweyo ziyahlolwa umgangatho, kubandakanya ukuhlolwa komgangatho wembonakalo, ukuchaneka kobukhulu, iimpawu zoomatshini, njl. Emva kokuphumelela uhlolo, ziyapakishwa kwaye zilungiselelwe ukuhanjiswa kubathengi.
    Intsimbi Emile okwe-ASTM H (11)

    UBUKHULU BEMVELISO

    Intsimbi Emile okwe-H (2) ye-EN
    Ukutyunjwa Unt
    Ubunzima
    kg/m)    		 Icandelo Eliqhelekileyo
    ukukhulisa
    mm    		 Icandelo
    UAma
    (cm²
    W H B 1 2 r A
    HE28 AA 61.3 264.0 280.0 7.0 10.0 24.0 78.02
    A 76.4 270.0 280.0 80 13.0 24.0 97.26
    B 103 280.0 280.0 10.5 18.0 24.0 131.4
    M 189 310.0 288.0 18.5 33.0 24.0 240.2
    HE300 AA 69.8 283.0 300.0 7.5 10.5 27.0 88.91
    A 88.3 200.0 300.0 85 14.0 27.0 112.5
    B 117 300.0 300.0 11.0 19.0 27.0 149.1
    M 238 340.0 310.0 21.0 39.0 27.0 303.1
    HE320 AA 74.3 301.0 300.0 80 11.0 27.0 94.58
    A 97.7 310.0 300.0 9.0 15.5 27.0 124.4
    B 127 320.0 300.0 11.5 20.5 27.0 161.3
    M 245 359.0 309.0 21.0 40.0 27.0 312.0
    HE340 AA 78.9 320.0 300.0 85 11.5 27.0 100.5
    A 105 330.0 300.0 9.5 16.5 27.0 133.5
    B 134 340.0 300.0 12.0 21.5 27.0 170.9
    M 248 377.0 309.0 21.0 40.0 27.0 315.8
    HE360 AA 83.7 339.0 300.0 9.0 t2.0 27.0 106.6
    A 112 350.0 300.0 10.0 17.5 27.0 142.8
    B 142 360.0 300.0 12.5 22.5 27.0 180.6
    M 250 395.0 308.0 21.0 40.0 27.0 318.8
    HE400 AA 92.4 3780 300.0 9.5 13.0 27.0 117.7
    A 125 390.0 300.0 11.0 19.0 27.0 159.0
    B 155 400.0 300.0 13.5 24.0 27.0 197.8
    M 256 4320 307.0 21.0 40.0 27.0 325.8
    HE450 AA 99.8 425.0 300.0 10.0 13.5 27.0 127.1
    A 140 440.0 300.0 11.5 21.0 27.0 178.0
    B 171 450.0 300.0 14.0 26.0 27.0 218.0
    M 263 4780 307.0 21.0 40.0 27.0 335.4
    Ukumisela Iyunithi
    Ubunzima
    kg/m)    		 Icandelo Eliqhelekileyo
    Ububanzi
    (mm)    		 ICandelo
    Indawo
    (cm²)
    W H B 1 2 r A
    HE50 AA 107 472.0 300.0 10.5 14.0 27.0 136.9
    A 155 490.0 300.0 t2.0 23.0 27.0 197.5
    B 187 500.0 300.0 14.5 28.0 27.0 238.6
    M 270 524.0 306.0 21.0 40.0 27.0 344.3
    HE550 AA t20 522.0 300.0 11.5 15.0 27.0 152.8
    A 166 540.0 300.0 t2.5 24.0 27.0 211.8
    B 199 550.0 300.0 15.0 29.0 27.0 254.1
    M 278 572.0 306.0 21.0 40.0 27.0 354.4
    HE60 AA t29 571.0 300.0 t2.0 15.5 27.0 164.1
    A 178 500.0 300.0 13.0 25.0 27.0 226.5
    B 212 600.0 300.0 15.5 30.0 27.0 270.0
    M 286 620.0 305.0 21.0 40.0 27.0 363.7
    HE650 AA 138 620.0 300.0 t2.5 16.0 27.0 175.8
    A 190 640.0 300.0 t3.5 26.0 27.0 241.6
    B 225 660.0 300.0 16.0 31.0 27.0 286.3
    M 293 668.0 305.0 21.0 40.0 27.0 373.7
    HE700 AA 150 670.0 300.0 13.0 17.0 27.0 190.9
    A 204 600.0 300.0 14.5 27.0 27.0 260.5
    B 241 700.0 300.0 17.0 32.0 27.0 306.4
    M 301 716.0 304.0 21.0 40.0 27.0 383.0
    HE800 AA 172 770.0 300.0 14.0 18.0 30.0 218.5
    A 224 790.0 300.0 15.0 28.0 30.0 285.8
    B 262 800.0 300.0 17.5 33.0 30.0 334.2
    M 317 814.0 303.0 21.0 40.0 30.0 404.3
    HE800 AA 198 870.0 300.0 15.0 20.0 30.0 252.2
    A 252 800.0 300.0 16.0 30.0 30.0 320.5
    B 291 900.0 300.0 18.5 35.0 30.0 371.3
    M 333 910.0 302.0 21.0 40.0 30.0 423.6
    HEB1000 AA 222 970.0 300.0 16.0 21.0 30.0 282.2
    A 272 0.0 300.0 16.5 31.0 30.0 346.8
    B 314 1000.0 300.0 19.0 36.0 30.0 400.0
    M 349 1008 302.0 21.0 40.0 30.0 444.2
    Intsimbi Emile okwe-H ye-EN

    EI-NHIntsimbi Emile

    Udidi: EN10034:1997 EN10163-3：2004

    Inkcazo: I-HEA HEB kunye ne-HEM

    Umgangatho: EN

     

    IIMBONAKALO

    Amandla aphezulu: Uyilo lwe-H-beams olunqamlezileyo luzinika amandla aphezulu okugoba kunye nomthamo wokuthwala umthwalo, nto leyo ezenza zilungele izakhiwo ezinkulu kunye neziganeko zemithwalo enzima.

     

    Uzinzo oluhle: Imilo ye-H-beams enqamlezileyo iqinisekisa uzinzo oluhle kakhulu xa iphantsi koxinzelelo kunye noxinzelelo, nto leyo eluncedo kuzinzo kunye nokhuseleko lwesakhiwo.

     

    Ulwakhiwo olulula: Uyilo lwee-H-beams lwenza kube lula ukuzidibanisa nokuzifakela ngexesha lenkqubo yokwakha, nto leyo enceda inkqubela phambili nokusebenza kakuhle kweprojekthi.

     

    Ukusetyenziswa kakhulu kwezixhobo: Uyilo lwee-H-beams lunokunika ukusebenza ngokupheleleyo kwentsimbi, lunciphise inkunkuma yezinto, kwaye luluncedo kulondolozo lwezixhobo kunye nokukhuselwa kwendalo.

     

    Uluhlu olubanzi lwezicelo: Ii-H-beams zisebenza kwiindawo ezahlukeneyo ezifana nezakhiwo zokwakha, iibhulorho, kunye nokuveliswa koomatshini, kunye namathuba amaninzi okusetyenziswa.

     

    Ngokubanzi, ii-H-beams zangaphandle ezisemgangathweni zinamandla aphezulu, uzinzo oluhle, kunye nolwakhiwo olulula. Ziluhlobo olubalulekileyo lwentsimbi yokwakha kwaye zisetyenziswa kakhulu kwiinkalo ezahlukeneyo zobunjineli.
    Intsimbi Emile okwe-H ye-ASTM (4)

    UHLOLO LWEMVELISO

    Iimfuno zokuhlolwa kwe-H-beams ziquka ikakhulu ezi zinto zilandelayo:

     

    Umgangatho wenkangeleko: Umgangatho wenkangeleko yee-H-beams kufuneka uhambelane nemigangatho efanelekileyo kunye neemfuno zomyalelo. Umphezulu kufuneka ube tyaba kwaye ugudile, ungabi naziphene ezicacileyo ezifana nokuqhekeka, imikrwelo kunye nomhlwa.

     

    Ubukhulu bejometri: Ubukhulu be-H-beams, kuquka ubude, ububanzi, ukuphakama, ubukhulu bewebhu, ubukhulu beflange, njl.njl., buya kuhlangabezana nemigangatho efanelekileyo kunye neemfuno ze-odolo.

     

    Isidanga sokugoba: Isidanga sokugoba see-H-beams kufuneka sihambelane nemigangatho efanelekileyo kunye neemfuno zomyalelo. Sinokubonwa ngokulinganisa ukuba iiplani kuzo zombini iziphelo ze-H-beam ziyafana okanye kusetyenziswa isixhobo sokulinganisa isidanga sokugoba.

     

    I-Torsion degree: I-torsion degree yee-H-beams kufuneka ihambelane nemigangatho efanelekileyo kunye neemfuno ze-odolo. Ingahlolwa ngokulinganisa ukuba amacala e-H-beam athe nkqo okanye kusetyenziswa isixhobo sokulinganisa i-torsion.

     

    Ukuphambuka kobunzima: Ubunzima be-H-beams buya kuhlangabezana nemigangatho efanelekileyo kunye neemfuno ze-odolo. Ukuphambuka kobunzima kunokubonwa ngokubeka umlinganiselo.

     

    Ukwakhiwa kweekhemikhali: Ukuba ii-H-beams kufuneka zifakwe i-weld okanye zenziwe olunye uhlengahlengiso, ukwakhiwa kwazo kweekhemikhali kufuneka kuhambelane nemigangatho efanelekileyo kunye neemfuno ze-odolo.

     

    Iimpawu zoomatshini: Iimpawu zoomatshini ze-H-beams, kubandakanya amandla okutsalwa, indawo yokukhupha, ukunwebeka, njl.njl., kufuneka zihlangabezane nemigangatho efanelekileyo kunye neemfuno ze-odolo.

     

    Uvavanyo olungonakalisiyo: Ukuba uvavanyo olungonakalisiyo luyafuneka kwi-H-beams, kufuneka lwenziwe ngokuhambelana nemigangatho efanelekileyo kunye neemfuno ze-odolo ukuqinisekisa umgangatho wangaphakathi olungileyo.

     

    Ukupakishwa kunye nokumakishwa: Ukupakishwa kunye nokumakishwa kwee-H-beams kufuneka kuhambelane nemigangatho efanelekileyo kunye neemfuno ze-odolo ukuze kube lula ukuthuthwa kunye nokugcinwa.

     

    Ukuqukumbela, xa kuhlolwa ii-H-beams, ezi mfuno zingasentla maziqwalaselwe ngokupheleleyo ukuqinisekisa ukuba umgangatho wazo uyahlangabezana nemigangatho efanelekileyo kunye neemfuno ze-odolo, ukuze kubonelelwe abasebenzisi ngeemveliso ze-H-beam ezikumgangatho ophezulu.
    Intsimbi Emile okwe-H (8) ye-EN

    ISICELO SEMVELISO

    Ii-H-beams zangaphandle ezisemgangathweni zisetyenziswa kakhulu kwicandelo lokwakha nobunjineli, kuquka kodwa kungaphelelanga apho kwezi zinto zilandelayo:
    Ubunjineli bezakhiwo, ubunjineli beebhulorho, ukwenziwa koomatshini, ukwakhiwa kweenqanawa, ukwakhiwa kwesakhiwo sentsimbi,

    Intsimbi Emile okwe-H (4) ye-EN

    UKUPAKISHA NOKUTHUMELA

    Ukupakisha Okukhuselekileyo: Iibhanti ze-H zigcwele imicu yentsimbi, iphepha elikhusela umhlwa, kunye neefilimu zeplastiki ukunqanda umonakalo kwindlela yokuthutha.

    Iipallets okanye iiBhalbhu zoMgangatho wokuthumela ngaphandleIipalethi okanye iibhakethi zipakishwa ngendlela efanelekileyo yokuthunyelwa kwamanye amazwe, zikhuselekile kwiiprojekthi zasekhaya okanye zaphesheya.

    Iinketho zoThutho eziGuquguqukayo: Silungiselela inkonzo yokuhambisa impahla ngolwandle, ngenqwelo moya kunye nenkonzo yokuhambisa impahla ngokukhawuleza ngokweshedyuli yeprojekthi.

    Iphakheji yesiko ye-Option-3 iyafumaneka: Le phakheji ingenziwa ngokwezifiso ngokweemfuno zeprojekthi yakho okanye ngokusekelwe kwiimfuno zakho zokungenisa/ukuthumela ngaphandle.

    Ukuhanjiswa Ngexesha: Inkonzo yokuhanjiswa ngokukhawuleza yobuninzi okanye iodolo engxamisekileyo iqinisekiswa lulawulo lwethu olufanelekileyo lwempahla kunye nesitokhwe.

    Intsimbi Emile okwe-H ye-ASTM (9)
    Intsimbi Emile okwe-H (5) ye-EN

    AMANDLA ENKAMPANI

    Intsimbi Emile okwe-ASTM H (10)
    10

    FAQ

    Umbuzo 1: Zenziwe ngezinto ezinjani ii-H Beams zakho?
    A:Ii-H Beams zethu zenziwe ngeisinyithi esomeleleyo nesakhiweyo, kunye neendlela zokukhethai-hot-dip galvanised okanye i-coated finishesukuze kuphuculwe ukumelana nokugqwala.

    Q2: Ngaba ungabonelela ngobukhulu obuqhelekileyo?
    A:Ewe, siyanikezelaIinkonzo ze-OEM/ODMImiqadi ye-H ingenziwa ngokwezifiso kwiubude, ububanzi, ukuphakama, kunye nomgangatho wentsimbingokweemfuno zeprojekthi.

    Umbuzo 3: Yeyiphi imigangatho ehlangabezana nayo ii-H Beams zakho?
    A:Ii-H Beams zethu ziyahambelanaImigangatho ye-ASTM, EN, kunye ne-ISO, ukuqinisekisa umgangatho ohambelanayo kunye nokusebenza koomatshini.

    Umbuzo 4: Zeziphi iindlela eziphambili zokusebenzisa ii-H Beams?
    A:Ifanelekile kwiizakhiwo zoshishino nezokuhlala, iibhulorho, iiprojekthi zeziseko zophuhliso, kunye nezakhiwo zokwakha.

    Umbuzo 5: Ii-H Beams zipakishwa njani ukuze zihanjiswe?
    A:Imiqadi ibotshelelwe ngokukhuselekileyoimitya yentsimbi, iphepha elichasene nomhlwa, kunye nokusonga okungangeni manzi, ilayishiweiipallet okanye iibhanti ezilungele ukuthumela ngaphandleKukho upakisho olulungiselelwe wena.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso