I-ASTM A572 Grade 50 Jumbo Beams Heavy Structural Steel Wide Flange H-Beams

I-ASTM A572 Grade 50 Jumbo Beams Heavy Structural Steel Wide Flange H-Beams Umfanekiso obonisiweyo
  • I-ASTM A572 Grade 50 Jumbo Beams Heavy Structural Steel Wide Flange H-Beams
  • I-ASTM A572 Grade 50 Jumbo Beams Heavy Structural Steel Wide Flange H-Beams
  • I-ASTM A572 Grade 50 Jumbo Beams Heavy Structural Steel Wide Flange H-Beams
  • I-ASTM A572 Grade 50 Jumbo Beams Heavy Structural Steel Wide Flange H-Beams
  • I-ASTM A572 Grade 50 Jumbo Beams Heavy Structural Steel Wide Flange H-Beams
  • I-ASTM A572 Grade 50 Jumbo Beams Heavy Structural Steel Wide Flange H-Beams

Inkcazo emfutshane:

Iibhile ezinkulu ze-ASTM A572 zeBanga lama-50Ziphantsi kodidi lwentsimbi ye-High-Strength Low-Alloy (HSLA) efanelekileyo ekusetyenzisweni apho kufuneka khona ukumelana nokugqwala kunye namandla aphezulu njengeebhulorho, izakhiwo kunye nezinye izakhiwo.


  • Indawo Yokuqala::iTshayina
  • Igama lebrand::Iqela leNsimbi yasebukhosini
  • Imigaqo yokuhlawula kunye nokuthumela:Ubungakanani obuncinci be-oda: iitoni ezi-5
  • Iinkcukacha zokuPakisha::Ukuthumela ngaphandle iiPakethe ezingangeni manzi kunye nokuQokelelwa kunye nokuQinisekiswa
  • Ixesha lokuzisa::Ikhona kwisitokhwe okanye kwiintsuku zokusebenza ezili-10-25
  • Immimiselo yokuhlawula::T/T, iWestern Union
  • Amandla okubonelela ::Iitoni ezingama-5000 ngenyanga
    • Thumela i-imeyile kuthi I-WhatsApp

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Intshayelelo yeMveliso

    Into Inkcazo
    Umgangatho wezinto eziphathekayo I-ASTM A572 Ibanga lama-50 (iNtsimbi yoLwakhiwo lweHSLA)
    Unikeze Amandla ≥ 345 MPa (50 ksi)
    Tensile strength 450–620 MPa
    Amacandelo Afumanekayo I-W6×9, i-W8×10, i-W12×30, i-W14×43, i-W18, i-W21, i-W24, i-W27, i-W30, i-W36, iiCandelo ezinkulu
    Ubude Ubude obuqhelekileyo obuyi-6 m kunye ne-12 m; Ubude obulungiselelweyo buyafumaneka
    Unyamezelo Lwemilinganiselo Ihambelana ne-ASTM A6 / A6M
    Isiqinisekiso soMgangatho Isatifikethi sovavanyo lweMill (EN 10204 3.1), ISO 9001, SGS / BV / TUV Uvavanyo luyafumaneka
    FUMANA IXABISO

    Idatha yoBugcisa

    Into Ibanga Ikhabhoni, ubuninzi,
    %    		 IManganese, ubuninzi,
    %    		 I-Silicon, ubuninzi,
    %    		 I-Phosphorusmax,
    %    		 I-Sulfur, ubuninzi,
    %
    Imiqadi yentsimbi ye-A572 42 0.21 1.35 0.40 0.04 0.05
    50 0.23 1.35 0.40 0.04 0.05
    55 0.25 1.35 0.40 0.04 0.05

    Ipropati yoomatshini ye-ASTM A36/A992/A572 W-beam (okanye H-beam)

    Into Ibanga Inqaku le-Yield min,ksi[MPa] Amandla okutsalwa, min, ksi[MPa]
    Imiqadi yentsimbi ye-A572 42 42[290] 60[415]
    50 50[345] 65[450]
    55 55[380] 70[485]

     

    Ubungakanani be-ASTM A572 Wide Flange H-beam - W Beam

    Ukutyunjwa Ubunzulu h (ngaphakathi) Ububanzi u-w (ngaphakathi) Ubungqingqwa bewebhu (ngaphakathi) Indawo yeCandelo (kwi-²) Ubunzima (lb/ft) Ix (kwi⁴) Hayi (kwi⁴) I-Wx (kwi³) I-Wy (kwi³)
    W 4×13 4.16 4.06 0.28 3.8 13 11.3 3.9 5.5 1.9
    I-W 5×16 5.01 5.00 0.24 4.7 16 21.3 7.5 8.5 3.0
    I-W 5×19 5.15 5.03 0.27 5.5 19 26.2 9.1 10.2 3.6
    W 6×12 6.03 4.00 0.23 3.6 12 22.1 3.0 7.3 1.5
    I-W 6×15 5.99 5.99 0.23 4.4 15 29.1 9.3 9.7 3.1
    W 6×16 6.28 4.03 0.26 4.7 16 32.1 4.4 10.2 2.2
    W 6×20 6.20 6.02 0.26 5.9 20 41.4 13.3 13.4 4.4
    W 6×25 6.38 6.08 0.32 7.3 25 53.4 17.1 16.7 5.6
    I-W 8×10 7.89 3.94 0.17 2.9 10 30.3 2.1 7.8 1.1
    I-W 8×13 7.99 4.00 0.23 3.8 13 39.6 2.7 9.9 1.4
    I-W 8×15 8.11 4.02 0.245 4.4 15 48.0 3.4 11.8 1.7
    I-W 8×18 8.14 5.25 0.23 5.3 18 61.9 8.0 15.2 3.0
    I-W 8×21 8.28 5.27 0.25 6.2 21 75.3 9.8 18.2 3.7
    I-W 8×24 7.93 6.495 0.245 7.1 24 82.8 18.3 20.9 5.6
    I-W 8×28 8.06 6.535 0.285 8.3 28 98.0 21.7 24.3 6.6
    I-W 8×31 8.00 7.995 0.285 9.1 31 110 37.1 27.5 9.3
    I-W 8×35 8.12 8.02 0.31 10.3 35 127 42.6 31.2 10.6
    I-W 8×40 8.25 8.07 0.36 11.7 40 146 49.1 35.5 12.2
    I-W 8×48 8.50 8.11 0.40 14.1 48 184 60.9 43.3 15.0
    I-W 8×58 8.75 8.22 0.51 17.1 58 228 75.1 52.0 18.3
    I-W 8×67 9.00 8.28 0.57 19.7 67 272 88.6 60.4 21.4
    W 10×12 9.87 3.96 0.19 3.5 12 53.8 2.2 10.9 1.1
    W 10×15 9.99 4.00 0.23 4.4 15 68.9 2.9 13.8 1.5
    W 10×17 10.11 4.01 0.24 5.0 17 81.9 3.6 16.2 1.8
    I-W 10×19 10.24 4.02 0.25 5.6 19 96.3 3.0 18.8 2.1
    W 10×22 10.17 5.75 0.24 6.5 22 118 11.4 23.2 4.0
    W 10×26 10.33 5.77 0.26 7.6 26 144 14.1 27.9 4.9
    W 10×30 10.47 5.81 0.30 8.84 30 170 16.7 32.4 5.8
    W 10×33 9.73 7.96 0.29 9.71 33 170 36.6 35.0 9.2
    I-W 10×39 9.92 7.985 0.315 11.5 39 209 45.0 42.1 11.3
    I-W 10×45 10.10 8.02 0.35 13.3 45 248 53.4 49.1 13.3
    W 10×49 9.98 10.00 0.34 14.4 49 272 93.4 54.6 18.7
    I-W 10×54 10.09 10.03 0.37 15.8 54 303 103 60.0 20.6
    I-W 10×60 10.22 10.08 0.42 17.6 60 341 116 66.7 23.0
    I-W 10×68 10.40 10.13 0.47 20.0 68 394 134 75.7 26.4
    I-W 10×77 10.60 10.19 0.53 22.6 77 455 154 85.9 30.1
    W 10×88 10.84 10.27 0.605 25.9 88 534 179 98.5 34.8
    I-W 10×100 11.10 10.34 0.68 29.4 100 623 207 112 40.0
    W 10×112 11.36 10.415 0.755 32.9 112 716 236 126 45.3

    Cofa iqhosha elisekunene

    Khuphela iinkcukacha kunye nobukhulu be-W beam yamva nje.

    Cofa apha

    Umphezulu wokugqiba

    umqadi we-h-carbon-steel
    umqadi we-h-umphezulu ogqunyiweyo
    umphezulu-weoyile emnyama-h-beam-royal

    Umphezulu oqhelekileyo

    Umphezulu ogqunyiweyo(ubukhulu be-hot-dip galvanizing ≥ 85μm, ubomi benkonzo ukuya kuthi ga kwiminyaka eli-15-20),

    Umphezulu weoyile emnyama

    Isicelo Esiphambili

    isicelo se-astm-a992-a572-h-beam-application-royal-steel-group-2
    isicelo se-astm-a992-a572-h-beam-application-royal-steel-group-3

    Imisebenzi yentsimbi yolwakhiwo:Imiqadi yesakhelo kunye neekholamu zezakhiwo eziphakamileyo zeeofisi, zokuhlala kunye neevenkile ezinkulu; izakhiwo eziphambili kunye nemiqadi yekreyini yezityalo zoshishino.

    Ubunjineli bebhulorho:Iinkqubo zeedekhi kunye nezakhiwo ezingaphantsi kweebhulorho ezincinci neziphakathi zeendlela ezinkulu kunye neebhulorho zikaloliwe.

    isicelo se-astm-a992-a572-h-beam-application-royal-steel-group-4
    isicelo se-astm-a992-a572-h-beam-application-royal-steel-group-1

    Ubunjineli basezidolophini nobungcali: Ezifana nezikhululo zikaloliwe ezingaphantsi komhlaba, izixhobo zokuxhasa imibhobho yasezidolophini, izixhobo zokuxhasa iikreyini zenqaba kunye nezixhobo zokuxhasa ulwakhiwo lwexeshana.

    Ubunjineli beHlabathi:Iimveliso zethu zenzelwe ukuhlangabezana nemigangatho yaseMntla Melika kunye neminye yamazwe ngamazwe yoyilo lwesakhiwo sentsimbi.

    Inzuzo yeRoyal Steel Group (Kutheni iRoyal Group ibalasele kubathengi baseMelika?)

    I-ROYAL-GUATEMALA
    Umthengisi we-ASTM A36 wide flange H beam

    1) IOfisi yeSebe - Inkxaso ngeSpanish, uncedo ngokucoca irhafu, njl.njl.

    2) Malunga neetoni ezingama-5,000 zesitokhwe esikhoyo, kunye nobukhulu obahlukeneyo

    I-ROYAL-H-BEAM
    I-ROYAL-H-BEAM-21

    3) Ihlolwe zimibutho enegunya efana neCCIC, SGS, BV, TUV kunye neepakethe ezisemgangathweni ezifanelekileyo elwandle.

    QHAGAMSHELANA NATHI
    Ibhokisi yokukhanya yeqhosha

    Ukupakisha kunye nokuHanjiswa

    Ukupakisha

    • Ihlanganiswe ngeentambo zentsimbi

    • Thumela ukupakisha okuqhelekileyo okufanelekileyo elwandle ngaphandle

    • Izigqubuthelo zeplastiki zeziphelo zemitha (ukuba ziyafuneka)

    • Isigqubuthelo esingangeni manzi siyafumaneka xa uceliwe

    Ukuhanjiswa

    • Ixesha lokuHanjiswa: Iintsuku ezisi-7–15 ngobukhulu besitokhwe

    • Iintsuku ezili-15–30 zeeodolo ezenzelwe wena

    • Izibuko Lokulayisha: IShanghai / ITianjin / IQingdao (okanye njengoko kufuneka)

    • Imigaqo yokuthumela: FOB, CFR, CIF iyafumaneka

    H型钢发货1
    ukuhanjiswa kwe-h-beam

    FAQ

    Q1: Ingakanani i-ASTM A572 Grade 50 enamandla okuvelisa imveliso encinci?

    A:Amandla esivuno esincinci yi50 ksi (345 MPa), enika amandla aphezulu kune-ASTM A36.

    Q2: Zithini iisayizi ezikhoyo?

    A:Sibonelela ngamacandelo e-W aqhelekileyo afana nalaW6–W36, kuqukaimiqadi emikhuluUbungakanani obulungiselelwe wena bukwafumaneka xa uceliwe.

    Umbuzo 3: Bungakanani ubude obuqhelekileyo?

    A:Ubude obuqhelekileyo bu6 m kunye ne-12 mIinkonzo zobude nezesinqumlo ezenzelwe wena ziyafumaneka.

    Umbuzo 4: Ngaba niyazibonelela iiSatifikethi zoVavanyo lweMill?

    A:Ewe, sibonelelaI-MTC (EN 10204 3.1)kwaye ixhase uhlolo lwamaqela esithathu olufanaI-SGS, i-BV, okanye i-TUV.

    Umbuzo 5: Ngaba imiqadi ingagqunywa okanye igqunywe nge-galvanized?

    A:Ewe, siyanikezelai-hot-dip galvanizing, i-primer coating, kunye nepeyinti ye-epoxyngokweemfuno zeprojekthi.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso