Iiprofayili zeZakhiwo zeNsimbi yaseYurophu ze-EN S355JR I beam
| Ipropati | Iinkcukacha / Iinkcukacha |
|---|---|
| Umgangatho wezinto eziphathekayo | EN S355JR (intsimbi yesakhiwo enamandla aphezulu) |
| Unikeze Amandla | Amandla okuThamba angama-470–630 MPa |
| Ubukhulu | IPE 80–IPE 600 / IPN 80–IPN 550 (ngoluhlu oluqhelekileyo lwe-EN 10365) |
| Ubude | Imigangatho: 6 m / 12 m; Ubude obulungiselelweyo ukuya kuthi ga kwi-24 m buyafumaneka |
| Unyamezelo Lwemilinganiselo | Ihambelana ne-EN 10034 kwicandelo lesakhiwo se-I esijijekileyo esishushu |
| Isiqinisekiso soMgangatho | EN 10204 3.1 / 3.2; Ukuhlolwa kwe-SGS, BV, TUV komntu wesithathu kuyafumaneka |
| Umphezulu wokugqiba | Intsimbi emnyama, i-hot-dip galvanizing, i-epoxy coating, i-sand-blasting SA2.5 |
| Izicelo | Izakhiwo ezithwala imithwalo enzima, iindawo zokugcina impahla, izakhiwo zoshishino, iibhulorho, iikhreyini, kunye nezakhiwo zoomatshini |
| I-Carbon Equivalent (Ceq) | ≤0.47% (iqinisekisa ukuwelda okuthembekileyo phantsi kweenkqubo zokuwelda ze-EN kunye ne-AWS) |
| Umgangatho womphezulu | Umphezulu ogudileyo ongenazimfanta, umhlwa, kunye ne-laminations; ukunyamezela ukuthe tye ≤2 mm/m |
| Ipropati | Inkcazo | Inkcazo |
|---|---|---|
| Unikeze Amandla | ≥355 MPa | Inqanaba loxinzelelo apho kuqala khona ukuguquka okusisigxina |
| Tensile strength | 470–630 MPa | Umthwalo omkhulu wokuxinana intsimbi onokuwunyamezela ngaphambi kokuba yaphuke |
| Ukwandiswa | ≥22% | Ubungakanani bokuguqulwa kweplastiki ngaphambi kokuba iqhekeke, bulinganiswe ngaphezu kobude obuqhelekileyo bokulinganisa |
| Ubunzima (uBrinell) | 140–180 HB | Uluhlu oluqhelekileyo lobunzima bentsimbi yesakhiwo ye-S355JR |
| Ikhabhoni (C) | ≤0.22% | Igcina ukudityaniswa kunye nokuqina kumanqanaba aphezulu amandla |
| IManganese (Mn) | 1.00–1.70% | Yomeleza amandla, ukuqina, kunye nokumelana neempembelelo |
| I-Sulfur (S) | ≤0.035% | I-sulfur ephantsi iphucula ukuqina kwayo kwaye ithintela ukuqhekeka |
| I-Phosphorus (P) | ≤0.035% | I-phosphorus ephantsi iphucula ukuqina kunye nomgangatho wokuwelda |
| I-Silicon (Si) | ≤0.55% | Yonyusa amandla kwaye isebenza njenge-deoxidizer ekwenzeni intsimbi |
| Imilo | Ubunzulu (ngaphakathi) | Ububanzi beFlange (ngaphakathi) | Ubukhulu bewebhu (ngaphakathi) | Ubukhulu beFlange (ngaphakathi) | Ubunzima (lb/ft) |
| I-W8×21（Ubungakanani obufumanekayo） | 8.06 | 8.03 | 0.23 | 0.36 | 21 |
| I-W8×24 | 8.06 | 8.03 | 0.26 | 0.44 | 24 |
| W10×26 | 10.02 | 6.75 | 0.23 | 0.38 | 26 |
| W10×30 | 10.05 | 6.75 | 0.28 | 0.44 | 30 |
| W12×35 | 12 | 8 | 0.26 | 0.44 | 35 |
| W12×40 | 12 | 8 | 0.3 | 0.5 | 40 |
| W14×43 | 14.02 | 10.02 | 0.26 | 0.44 | 43 |
| W14×48 | 14.02 | 10.03 | 0.3 | 0.5 | 48 |
| W16×50 | 16 | 10.03 | 0.28 | 0.5 | 50 |
| W16×57 | 16 | 10.03 | 0.3 | 0.56 | 57 |
| W18×60 | 18 | 11.02 | 0.3 | 0.56 | 60 |
| W18×64 | 18 | 11.03 | 0.32 | 0.62 | 64 |
| W21×68 | 21 | 12 | 0.3 | 0.62 | 68 |
| W21×76 | 21 | 12 | 0.34 | 0.69 | 76 |
| W24×84 | 24 | 12 | 0.34 | 0.75 | 84 |
| W24×104（Ubungakanani obufumanekayo） | 24 | 12 | 0.4 | 0.88 | 104 |
| Ipharamitha | Uluhlu oluqhelekileyo | Ukunyamezelana kwe-EN 10034 | Amanqaku |
|---|---|---|---|
| Ubunzulu (H) | 100–600 mm (uluhlu lwe-IPE/IPN) | ±3 mm | Kufuneka ihlangabezane nobukhulu obuqhelekileyo bokusebenza kwesakhiwo |
| Ububanzi beFlange (B) | 55–250 mm | ±3 mm | Iqinisekisa ukusasazwa komthwalo okuzinzileyo kunye nokuchaneka kokuwelda |
| Ubukhulu bewebhu (t_w) | 4.5–15 mm | ±10% okanye ±1 mm | Ichaphazela amandla okucheba kunye nomthamo wayo iyonke |
| Ubukhulu beFlange (t_f) | 6–24 mm | ±10% okanye ±1 mm | Kubalulekile ekuxhathiseni nasekuqineni kokugoba |
| Ubude (L) | Umgangatho oqhelekileyo yi-6–12 m; yenzelwe ukuya kuthi ga kwi-24 m | +50 / 0 mm | Akukho kunyamezelana okubi okuvumelekileyo kwimiqadi yesakhiwo |
| Ukuthe tye | — | ≤ L/1000 | Umzekelo: ukuphambuka okuphezulu kwe-12 mm kwi-12 m beam |
| Isikwere seFlange | — | ≤4% yobubanzi beflengi | Iqinisekisa ukulungelelaniswa ngokuchanekileyo kunye nokuhlanganiswa |
| Jika | — | ≤4 mm/m | Kubalulekile kwizicelo zemizi-mveliso kunye neebhulorho ezithatha ixesha elide |
I-Hot Rolled Black: Imeko eqhelekileyo
Ukucoca nge-hot-dip: ≥85μm (ihambelana ne-ASTM A123), uvavanyo lokutshiza ityuwa ≥500h
Ukwaleka: Ipeyinti yolwelo yatshizwa ngokulinganayo phezu komphezulu wentsimbi kusetyenziswa umpu wokutshiza osebenzisa umoya.
| Udidi Lokwenza Ngokwezifiso | Iinketho | Inkcazo | I-MOQ |
|---|---|---|---|
| Ubukhulu | Ubude (H), Ububanzi beFlange (B), Ubunzima beWeb kunye neFlange (t_w, t_f), Ubude (L) | Uluhlu olupheleleyo lweeprofayili ze-IPE/IPN; ubungakanani obulungiselelwe wena kunye nenkonzo yokusika ubude iyafumaneka | iitoni ezingama-20 |
| Unyango Lomphezulu | I-As-rolled (black), I-Sandblasting/Shot blasting, I-Anti-rust oil, Ipeyinti ye-Epoxy, I-Hot-dip galvanizing | Iphucula ukumelana nokugqwala kwiindawo zangaphandle, zoshishino, nezolwandle | iitoni ezingama-20 |
| Ukucutshungulwa | Ukubhola, Ukufaka i-slotting, Ukusika i-Bevel, Ukuwelda, Ukulungisa ubuso bokugqibela, Ukulungiswa kwangaphambili kwesakhiwo | Yenziwe ngokwemizobo; ifanelekile kwiibhari ezithwala umthwalo, izakhelo, iikholamu, kunye neendibano zesakhiwo sentsimbi | iitoni ezingama-20 |
| Ukumakisha kunye nokuPakisha | Ukumakisha ngokwezifiso, Ukubotshwa kwebhanti, Iintloko/iipleyiti zokukhusela, Ukusonga okungangeni manzi, Isicwangciso sokulayisha isikhongozeli | Iqinisekisa ukuthuthwa okukhuselekileyo kunye nokulayisha okusebenzayo kwiinqanawa, oololiwe, okanye iilori | iitoni ezingama-20 |
Ulwakhiwo lwesakhiwo: imiqadi kunye neekholamu zezakhiwo ezinemigangatho emininzi, iifektri, iindawo zokugcina impahla kunye neebhulorho ezisebenza njengamalungu aphambili okuthwala imithwalo.
Ubunjineli beBhulorho: Iiplanga eziphambili okanye zesibini zeebhulorho zendlela kunye neenyawo.
Inkxaso yeZixhobo eziNzima kunye neMizi-mveliso: Oomatshini abanzima kunye namaqonga emizi-mveliso aqiniswa yinkxaso.
Ukomelezwa kweZakhiwo: Ukuguqulwa okanye ukulungiswa ngokutsha kwesakhiwo okanye isakhiwo okwandisa amandla aso okuthwala imithwalo okanye amaxesha amaninzi.
Ulwakhiwo lwesakhiwo
Ubunjineli beBhulorho
Inkxaso yeZixhobo zeShishini
Uqinisekiso lweZakhiwo
1) IOfisi yeSebe - inkxaso yabantu abathetha iSpanish, uncedo lokucoca impahla, njl.njl.
2) Ngaphezulu kweetoni ezingama-5,000 zesitokhwe esikhoyo, kunye nobukhulu obahlukeneyo
3) Ihlolwe yimibutho enegunya efana neCCIC, SGS, BV, kunye neTUV, kunye neepakethe ezisemgangathweni ezifanelekileyo elwandle
Ukupakisha
Ukhuseleko olupheleleyo: I-tarpaulin kunye nee-desiccant ezi-2-3 zee-I-beams; Amashiti e-tarpaulin avala ubushushu nangenamanzi athintela imvula ukuba ingangeni kwii-I-beams.
Ukubopha ukhuseleko: Kwiphakheji nganye isongelwe ngentambo yentsimbi eyi-12 - 16 mm, eyaneleyo kwiitoni ezi-2-3 kwaye inezixhobo zokuphakamisa ezifanelekileyo.
Iilebheli ezilungileyoIilebheli ezithetha iilwimi ezimbini (isiNgesi nesiSpanish) eziquka iBakala, iNkcazelo kunye nekhowudi ye-HS, iBatch # kunye nesalathiso sovavanyo.
Ukhuseleko oluphezulu: I imisebe ≥800 mm ngomaleko weoyile yokulungelelanisa kunye ne-tarpaulin ephindwe kabini.
Ukuhanjiswa
Ukuthunyelwa Okukhuselekileyo: Eyona Ntsebenziswano ibalaseleyo yabathwali bokuhamba ngenqanawa ngokukhuselekileyo (MSK, MSC, COSCO njl.njl.).
Ulawulo lwemeko: Imisebe ayivuthi uthuli kwaye ungathemba ukuba iza kufika iphelele oko kuthetha ukuba unomsebenzi ongenaxhala.
Q: Zeziphi imigangatho ezilandelwa yi-I beams yakho kumbindi weMelika?
A: ii-i beams zethu zihambelana ne-ASTM A36 kunye ne-A572 Grade 50 eyamkelweyo eMelika Ephakathi. Singabonelela nangeemveliso ezihlangabezana nomgangatho wesizwe (njenge-MEXICO NOM) okanye imigangatho efanayo.
Q: Lingakanani ixesha lokuhambisa impahla ePanama?
A: Ixesha lokuThutha Ukuthutha Ulwandle ukusuka eTianjin Port ukuya eColon Free Trade Zone iintsuku ezingama-28-32. Iintsuku ezingama-45-60 zokwenziwa nokuhanjiswa. Ukuhanjiswa okukhawulezileyo nako kuyafumaneka.
Q: Ingaba unayo imvume yerhafu?
A: Ewe, abarhwebi bethu abaziingcali baza kwenza isibhengezo seerhafu, intlawulo yerhafu kunye nomsebenzi wonke wephepha, ukuhanjiswa kwayo kuya kuba lula.
Idilesi
Bl20, Shanghecheng, Shuangjie Street, Beichen District, Tianjin, China
I-imeyile
Ifowuni
+86 13652091506
