Iiprofayili zeNsimbi yeNsimbi yaseYurophu EN 10031 Intsimbi ethe tyaba
Iinkcukacha zeMveliso
| Into | Iinkcukacha |
|---|---|
| Imveliso | Intsimbi Ethe tyaba |
| Umgangatho | I-EN 10031 |
| Izinto eziphathekayo | Intsimbi engenanto yokuxuba eqengqelekayo ebandayo |
| Ifomu | Ipleyiti / Umcu / Iphepha |
| Ubukhulu (mm) | 0.5 – 3.0 |
| Ububanzi (mm) | 20 – 1,500 |
| Ubude (mm) | 2,000 – 12,000 / ubude obufutshane |
| Unyango Lomphezulu | Umphezulu oqengqelekayo obandayo, ogudileyo, ofanelekileyo ukupeyinta, ukugquma, ukugalela i-galvanizing, okanye ukwenziwa ngakumbi |
| Amandla okuKhula (i-MPa) | 240 – 360 (kuxhomekeke kudidi kunye nobukhulu) |
| Amandla okuThamba (MPa) | 350 – 500 |
| Uvavanyo lweMpembelelo | Ukhetho, kuxhomekeke kwinqanaba kunye nesicelo |
I-EN 10031 Ulwakhiwo lweekhemikhali zentsimbi ethe tyaba (eziqhelekileyo)
| I-elementi | Umxholo ophezulu (%) |
|---|---|
| C (Ikhabhoni) | 0.20 – 0.25 |
| I-Mn (iManganese) | 0.50 – 1.50 |
| I-P (iPhosphorus) | 0.035 |
| S (Isalfure) | 0.035 |
| I-Si (iSilicon) | 0.10 – 0.50 |
Ubungakanani beNtsimbi eSicaba ye-EN 10031
| Uhlobo lweMveliso | Ubukhulu (mm) | Ububanzi (mm) | Ubude (m) | Amagqabaza |
|---|---|---|---|---|
| Ibha ethe tyaba | 0.5 – 3.0 | 20 – 1,500 | 2 – 12 / Ngokwezifiso | Umphezulu oqengqelekayo obandayo, ogudileyo, ofanelekileyo ukupeyinta, ukugquma, okanye ukuwelda |
| Ipleyiti Ethe tyaba | 0.5 – 3.0 | 20 – 1,500 | 2 – 12 / Ngokwezifiso | Iqengqeleka ngokubandayo, igudileyo, inamandla oomatshini ahambelanayo okusetyenziswa kwisakhiwo |
| Iphepha Elisicaba | 0.5 – 3.0 | 20 – 1,500 | 2 – 12 / Ngokwezifiso | Iqengqeleka ngokubandayo, igudileyo, ifanelekile ukusika, ukugoba, kunye nokwenziwa ngakumbi |
| Umtya oSicaba | 0.5 – 3.0 | 20 – 1,500 | 2 – 12 / Ngokwezifiso | Inganqunyulwa okanye inqunyulwe ngokobukhulu bayo, ilungele ukwenziwa okanye ukubumba ngokuchanekileyo |
| Ubungakanani obuQhelekileyo | 0.5 – 3.0 | 20 – 1,500 | Sika ngokobude | Ubukhulu kunye nokucutshungulwa ngokwezifiso kuyafumaneka xa kuceliwe |
Umxholo owenziwe ngokwezifiso we-EN 10031 weNtsimbi eSicaba
| Udidi Lokwenza Ngokwezifiso | Iinketho | Inkcazo / Amanqaku |
|---|---|---|
| Ubukhulu | Ubukhulu, Ububanzi, Ubude | Ubukhulu: 0.5–3.0 mm; Ububanzi: 20–1,500 mm; Ubude: 2–12 m okanye ubude obunqunqiweyo |
| Ukucutshungulwa | Ukusika, Ukuqhumisa, Ukupeyinta, i-CNC | Intsimbi ethe tyaba eqengqelekayo ebandayo ingasikwa, igrunjwe, icutshungulwe nge-CNC, idutyulwe, okanye ipeyintwe ngokweemfuno zeprojekthi. |
| Unyango Lomphezulu | Iqengqeleke ngokubandayo, Mnyama, Ipeyintiwe | Ukugqitywa komphezulu kukhethwe ngokusekelwe kusetyenziso lwangaphakathi/lwangaphandle kunye neemfuno zokumelana nokugqwala |
| Iipropati zoomatshini | Amanqaku e-EN 10131 / EN 10031 | Amandla okuvelisa: 240–360 MPa; amandla okutsalwa: 350–500 MPa; impembelelo ivavanyiwe ukuba iyafuneka kuxhomekeke kudidi |
| Ukuthe tye kunye nokunyamezelana | Umgangatho / Ukuchaneka | Ukulungelelana okulawulwayo kunye nokunyamezelana okulinganayo okufumanekayo kwiimfuno zokwenza izinto ngokuchanekileyo nangokucwangcisiweyo |
| Ukumakisha kunye nokuPakisha | Iilebheli ezenziwe ngokwezifiso, Inombolo yobushushu, Ukupakisha ngaphandle | Iimpawu ziquka ubungakanani, umgangatho wezinto, inani lobushushu; zipakishwe kwiibhakethi ezinemitya yentsimbi ezifanelekileyo ukuthunyelwa kwisikhongozeli okanye ukuhanjiswa kwasekuhlaleni |
Umphezulu Ukugqiba
Umphezulu weNsimbi yeCarbon (iFlat yeNsimbi yeCarbon)
Umphezulu weGalvanised (iGalvanised Flat Bar)
Umphezulu opeyintiweyo (Ibha ethe tyaba epeyintiweyo)
Isicelo
Izakhiwo kunye noKwakha: Isetyenziselwa iiRoofs, Cladding, Panels kunye neStacker Beams apho umgangatho womphezulu kunye nobukhulu bubalulekile.
Oomatshini kunye nezixhobo: Eyona ndawo ilungileyo eneenxalenye ezichanekileyo ezenziwe ngomatshini, iibrakethi kunye nee-mounts zisebenzisa ithuba lokubanda okugoqekileyo, kunye nokunyamezelana okusondeleyo.
Iimoto kunye noThutho: Isetyenziswa kwiiphaneli zomzimba wesithuthi kunye nezibiyeli zezixhobo zokubamba, kunye neebhloko zenjini kunye neenxalenye zetshasi, inika umgangatho ofanayo womgangatho woomatshini kunye nomphezulu.
Ukuveliswa kunye neMizi-mveliso JikeleleSebenzisa izinto ezenziwe ngombala obandayo, izinto ezenziwe nge-welded, kunye nezinto ezigqunyiweyo, upende, u-galvanize, okanye wenze.
Kutheni Ukhetha Thina?
1. Intsimbi yokwakha esemgangathweni ophezulu yenziwe phantsi kokuphunyezwa komgaqo we-EN 10031.
2.Iintlobo ezininzi zeenkcazo zinokwenziwa ngokwezifiso kwiimfuno ezahlukeneyo zeprojekthi.
3.Ukuwelda okuhle, ukusika, ukubhola, ukugoba kunye nokucubungula i-CNC.
4. Amandla oomatshini kunye nokuqina kwempembelelo kuyaqinisekiswa, kufanelekile kumsebenzi onzima wolwakhiwo.
5. Ukupakisha okuchwephesha kokuthumela ngaphandle kunokuqinisekisa ukhuseleko lokuthunyelwa kwezikhongozeli kunye nokuphathwa okulula kwendawo.
6. Ukuhanjiswa ngokukhawuleza kunye nenkxaso yobugcisa kwiiprojekthi zakho kunye nezicelo zobunjineli.
- *Thumela i-imeyile ku[i-imeyile ikhuselwe]ukuze ufumane ikowuteshini yeeprojekthi zakho
Ukupakishwa kunye nokuthunyelwa
Ukupakisha:
Iimveliso zentsimbi ethe tyaba zibotshelelwe ngokuqinileyo ngeentambo zentsimbi ukuqinisekisa ukuba akukho ntshukumo ngexesha lokuthuthwa.
Ukhuseleko ekonakaleni nasekugqwaleni: Kusetyenziswa iileya ezininzi zokukhusela imiphetho, iphepha elingangeni manzi kunye nokwaleka okulwa nomhlwa.
Sinikezela ngeendlela zokupakisha ezenziwe ngokwezifiso ukuba kuyimfuneko ezifana neebhanti ezilungele izikhongozeli, iikreyithi zomthi okanye iipalethi, kuxhomekeke kwiimfuno zomthengi.
Iphakheji nganye iphawulwe ngodidi lwemveliso, ubungakanani, inombolo yobushushu kunye nobungakanani ukuze kube lula ukuyifumana.
Ukuhanjiswa:
Iimveliso zingathunyelwa ngesikhongozeli, ngobuninzi okanye ngelori.
Ukuhanjiswa ngexesha elifanelekileyo ukuze kuhlangatyezwane neshedyuli yeprojekthi kuqinisekiswa yinkonzo yezothutho esebenzayo nethembekileyo.
Ivumela ukuthunyelwa okungaphelelanga, ii-odolo ezidibeneyo kunye nokuhanjiswa ngokweeprojekthi.
Amaxwebhu okuthumela kwamanye amazwe akhutshwa ukuze kube lula urhwebo lwamazwe ngamazwe olungenazingxaki.
FAQ
-
Yintoni i-EN 10031 intsimbi ethe tyaba?
I-EN 10031 intsimbi ethe tyaba yintsimbi yolwakhiwo esemgangathweni ophezulu eyenziwe ngokwemigaqoI-EN 10031, ifanelekile kwiibhari, iipleyiti, iibhari, kunye nezinto zoshishino. -
Yintoni umahluko phakathi kwamabanga aphantsi kwe-EN 10031?
Amanqanaba ahlukeneyo e-EN 10031 ayahluka ikakhulu kwiimpawu zoomatshini ezifana namandla okuvelisa, amandla okutsalwa, kunye nokuqina kwempembelelo. Amanqanaba athile akhethwa ngokusekelwe kwiimfuno zeprojekthi zokusebenza kwesakhiwo. -
Ngaba ubukhulu kunye nonyango lomphezulu lungenziwa ngokwezifiso?
Ewe. Ubukhulu, ububanzi, ubude, kunye nokugqitywa komphezulu (ogqunywe ngobushushu, opeyintiweyo, omnyama, okanye ogqunywe ngengubo) konke oku kunokulungiswa ukuze kuhlangatyezwane neemfuno zeprojekthi yakho. -
Ngaba i-EN 10031 intsimbi ethe tyaba iyanyibilika kwaye kulula ukuyicubungula?
Inene. Ibonelela ngokusebenza kakuhle kokudityaniswa kunye nokusebenza ngomatshini, ifanelekile ekusikeni, ekubholeni, ekugobeni, nasekwenziweni kwe-CNC.
Idilesi
Bl20, Shanghecheng, Shuangjie Street, Beichen District, Tianjin, China
I-imeyile
Ifowuni
+86 13652091506
Iindidi zemveliso
-
Iiprofayili zeNsimbi yeNsimbi yaseMelika i-ASTM A1011 yeNsimbi ...
-
Iiprofayili zeNsimbi yeNsimbi yaseMelika i-ASTM A572 Flat Steel
-
Iiprofayili zeNsimbi yeNsimbi yaseMelika i-ASTM A36 Flat Steel
-
Iiprofayili zeNsimbi yeNsimbi yaseYurophu EN 10025-2 S235JR...
-
Iiprofayili zeNsimbi yeNsimbi yaseYurophu EN 10025-2 S355JR...
-
Iiprofayili zeNsimbi yeNsimbi yaseMelika i-ASTM A283 Flat Steel